Alma Machinery - The Dealer You Can Trust

Featuring the world's largest
inventory of reconditioned
stamping presses

HOME
 
INVENTORY
 
NEW ARRIVALS
 
SEARCH
 
SPECIALS
 
NEWS
 
CONTACT
 
ABOUT

USED SERVO FEED LINES

Reconditioned Look for the Alma Machinery RECONDITIONED blue ribbon!
Every used press with this blue ribbon has been professionally
reconditioned by our experienced staff!
Click on an individual press name to view its full listing plus photos and video (if available)
Reconditioned 6,000# x 12" x .230" LITTELL (1970)
12" x .060"-.230" Capacity, 62" O.D., with Variable Speed Drive and Loop Control,
(Contact Ann Arbor #3876)

Reconditioned 13,000# x 16" x .125" PA Servo Feed Line
With 18" x .225" (12" x .250") 7-Roll Perfecto Straightener, 13,000 Lb. x 24" Reel and Coil Car, *With (2)-16" x .125" PA Servo Feeds, 3 in Stock!!!
(Contact Ann Arbor #3785)

Not Reconditioned 18" x .250" PA Servo Feed Line
With 24" x .250" Perfecto 9-Roll Straightener, 13,000 Lb.x 24" Reel and Coil Car, 18" x .190" PA Servo Feed
(Contact Ann Arbor #3788)

Not Reconditioned 13,000# x 20" x .105" PA Servo Feed Line
With 18" x .225" (12" x .250) Perfecto 7-Roll Straightener 13,000 Lb. x 24" Reel and Coil Car, *With (2)-20" x .105" PA Servo Feeds, 2 in Stock!!!
(Contact Ann Arbor #3789)

Not Reconditioned 13,000# x 20" x .105" PA Servo Feed Line
With 18" x .126" Perfecto 7-Roll Straightener, 13,000 Lb. x 24" Reel and Coil Car, With 20" x .105" PA Servo Feed, 2 Complete Lines in Stock!
(Contact Ann Arbor #3793)

Not Reconditioned 20,000# x 18" x .190" PERFECTO Comb. Reel/Straightener (1990)
24" Wide, 72" OD, 18-22" ID Reel with Coil Car, 18"x.190" 9-Roll Straightener W/Overarm, Peeler and No. 500-18 Servo Feeder
(Contact Ann Arbor #3485)

  Guarantee Payment Terms Conditions of Sale

TWO LOCATIONS TO SERVE YOU
Ann Arbor Headquarters
3761 E. Ellsworth Road
Ann Arbor, MI 48108
(734) 971-8860
Fax: (734) 971-9080
info@almamachinery.com
Nashville Warehouse
841 Mayberry Springs Road
Columbia, TN 38401
(615) 369-7788
Fax: (615) 369-7789
ken@almamachinery.com