|
Featuring the world's largest inventory of reconditioned stamping presses |
|
| |
USED HYDRAULIC PRESSES
 |
Look for the Alma Machinery RECONDITIONED blue ribbon! Every used press with this blue ribbon has been professionally reconditioned by our experienced staff! |
 |
1 Ton DENISON Gap Frame Hydraulic Press (1966)6" Str., 8" DL, 10" x 9" Bed, Bench Type, 110 Volt, (Contact Ann Arbor #3630)
|
|
4 Ton Dual Cylinder H-Frame Air Press (2001)4" Stroke, 22" Daylight, 84" x 19" Bed, *Equipped with 2 - 3.8 Ton Air Cylinders with Adjustable Positioning on H-Beam Allen Bradley "Micro-Logic" PC, Palm Buttons, (Contact Ann Arbor #3986)
|
|
8 Ton HANNIFIN #OGF-8A (1973) 6" Str, 15" Daylight, 22-1/4" x 14-1/2" Bed, (Contact Nashville #3699)
|
|
9.5 Ton Dual Cylinder Assembly/Cut Off H-Frame Hydraulic Press (2001) 4" Stroke, 20" Daylight, 72" x 20" Bed, *Equipped with 2 - 9.5 Ton Hyd. Cylinders with Adjustable Positioning on H-Beam Solid State Allen Bradley PC, Light Curtains, Palm Buttons (Contact Ann Arbor #3987)
|
|
15 Ton JR AUTOMATION 4-Post Type Hydraulic Press (1995) 12" Stroke, 38" Daylight, 74" x 32" Useable Bed, with Allen Bradley SLC 500 Controller (Contact Ann Arbor #3547)
|
|
18 Ton K.R. WILSON H-Frame, 2-Post Press (1976) 12" max. Stroke, 17" max. Daylight, 24" x 14" Bed & Ram (Contact Ann Arbor #3445)
|
|
19 Ton NEFF Gap Frame Hydraulic Press (1999) 10" Stroke, 20" Daylight, 24" x 21" Bed, with Allen Bradley SLC 5/01 Controller (Contact Ann Arbor #3909)
|
|
20 Ton SCHULER Gap Type Hydraulic Press (1986) 24" Stroke, 30" Daylight, 32" x 22" Bed, 500/215/450 IPM, 32" x 15" 2-Post Guided Ram, 3 in Stock! (Contact Ann Arbor #3855)
|
|
25 Ton DENISON Gap Frame Hydraulic Press 12" Stroke, 19" Daylight, 30" x 20" Bed, 25 HP Motor, Pump, and Conrols (Contact Ann Arbor #3908)
|
|
28 Ton GREENLEE 4 Post DOWN-ACTING #28T4BAR 15" Stroke, 32" DL, 47" x 29" Bed, 32½" x 16½" Btw Posts (Contact Nashville #3371)
|
|
28 Ton GREENLEE 4 Post DOWN-ACTING #28T4BAR 15" Stroke, 32" DL, 47" x 29" Bed, 32½" x 16½" Btw Posts (Contact Nashville #3375)
|
|
28 Ton HANNIFIN 4-Post Hydraulic Press 6" Stroke, 20" Daylight, 34" x 27" Bed, 20 HP Motor and Controls (Contact Ann Arbor #3907)
|
|
28 Ton MILLER MOREHEAD 4-Post Hydraulic Press 12" Stroke, 24" Daylight, 71" x 27" Overall Bed, 40 HP Motor and Vickers Pump, (Contact Ann Arbor #3958)
|
|
30 Ton HANNIFIN Gap Type 16" Stroke, 36" Daylight, 36" x 28" Bed, 36" x 18" Ram, 20" Between Uprights, Very Good! (Contact Ann Arbor #3661)
|
|
28 Ton XLO (B&T) 4 Post DOWN-ACTING #28T4BAR 15" Stroke, 28" DL, 47" x 28" Bed, 32½" x 16½" Btw Posts, Reconditioned, Excellent! (Contact Nashville #3373)
|
|
30 Ton K.R. WILSON 4 Post DOWN ACTING 30" Max. Stroke, 30" Daylight, 51" x 36" Bed (Contact Ann Arbor #3285)
|
|
30 Ton M & M 4 Post DOWN-ACTING #1R (1985) 18" Stroke, 30" DL, 15" SH, 42" x 33" Bed (Contact Nashville #3329)
|
|
30 Ton MODERN 4 Post Model No. 1R, Down-Acting Type 18" max. Stroke, 30" max. Daylight, 43" x 25" Bed & Ram, 34" x 17" Between Posts, equipped with Safety Latches on Ram, Motor and Controls, (2 in Stock) (Contact Ann Arbor #3441)
|
|
30 Ton MORRELL 4 Post Type 36" Stroke, 48" Daylight, 82" x 36" Overall Bed & Ram, 72" x 27" Between Posts, Floor Standing (Contact Ann Arbor #3660)
|
|
30 Ton PRINCE Hydraulic Trim 16" Stroke, 26" Daylight, 43" x 30" Overall Bed (Contact Nashville #3077)
|
|
40 Ton LANS 4-Post Hydraulic Press (2002) 18" Str, 28" DL, 60" x 36" Bed (Contact Ann Arbor #3820)
|
|
42 Ton NEFF Gap Press with Rotary Table (1992) 10" Stroke, 24" Daylight, 22½" x 20" Bed, with 48" Dia. Rotary Indexing Table (Contact Ann Arbor #3780)
|
|
50 Ton DAKE 4 Post (1984) 36" Max. Stroke, 48" Max. Daylight, 99" x 55" Bed & Ram, 86" RL between Posts, 670/42/450 IPM, Safety Latches on Ram, Floor Standing Base (Contact Ann Arbor #3669)
|
|
50/2 Ton Hypercyl Assembly Gap Type Press (2003) 1/2" @ 50 Ton Power Stroke, 10" @ 2 Ton Advance Stroke, 19" Daylight, 41" x 24" Bed, 2003! (Contact Ann Arbor #3822)
|
|
50 Ton K.R. WILSON Adjustable H-FRAME Testing Press (1988) 12" Max. Stroke, 36" Max. Daylight-Adj. Bed, 14" x 14" Bed Area, 24" RL between Uprights (Contact Ann Arbor #3717)
|
|
50 Ton MILLER MOREHEAD 4-Post Hydraulic Press 12" Stroke, 23" Daylight, 71" x 27" Overall Bed, 60 HP Motor with Vickers Pump, (Contact Ann Arbor #3957)
|
|
50 Ton MULTIPRESS Gap Type Hydraulic Press (1992) 16" Stroke, 24" Daylight, 17" x 20" Bed, with Motor and Controls (Contact Ann Arbor #3861)
|
|
50 Ton STERLING (1990) 24" Stroke, 36" Daylight, 12" SH, 48" x 48" Bed (Contact Nashville #3327)
|
|
50 Ton STERLING (1991)24" Stroke, 42" Daylight, 18" SH, 47" x 47" Bed, Reconditioned (Contact Nashville #3328)
|
|
50 Ton TRIDENT 4 Post Down Acting Type (2 Press Trim Cell) (1998) 18" Stroke, 54" Daylight, 71" x 44" Useable Bed, with Safety Latches on Ram, *Note: Will sell 1-press seperately! (Contact Ann Arbor #3796)
|
|
50 Ton WILLIAMS & WHITE 4-Post (1985) 40" Stroke, 47" Daylight, 84" x 36" T-Slotted Bed & Ram, 72" RL between Posts, Safety Latches, 2 in Stock (Contact Ann Arbor #3657)
|
|
60 Ton 4-Post Type Hydraulic Press with Pre-Oven & Feed Line 30" Stroke, 50" Daylight, 96" x 60" Useable Bed, with Safety Latches on Ram, Pre-Heat Oven to 400 Degrees, 74" Material Feed Line, Very Good! (Contact Ann Arbor #3903)
|
|
60 Ton Hamilton 4-Post Type Hydraulic Press 38" Stroke, 47" Daylight, 84" x 30" Useable Bed & Ram, with Material Roll Feed Line (Contact Ann Arbor #3902)
|
|
60 Ton PH HYDRAULICS DGF-60 Gap Type Hydraulic Press (1994) 24" Stroke, 32" Daylight, 30" x 27" Bed, equipped with Shuttle Table-12" Stroke, Allen Bradley #SLC 5/02 Controller (Contact Ann Arbor #3858)
|
|
60 Ton SAVAGE 4 Post Down-Acting (1992) 16" Stroke, 25" Daylight, 62" x 36" Bed & Ram, Reconditioned, Excellent (Contact Ann Arbor #2776)
|
|
60 Ton SAVAGE 4-Post Type Molding Press 30" Stroke, 40" Daylight, 43" x 30" Bed, 30" x 17" Between Posts, *Equipped with 5" Dia. Ejector Cylinder in Base-8 (Contact Ann Arbor #3829)
|
|
75 Ton CINCINNATI Gap Type Hydraulic Press (1992) 8" Stroke, 36" x 24" Bed, with 54" Dia. 8-Station Rotary Index Table, also with BTM "Tog-L-Loc" System, 1990 (Contact Ann Arbor #3792)
|
|
75 Ton HANNIFIN Gap Type Hydraulic Press 25" Stroke, 45" Daylight, 30" x 35" Bed with 13" x 18" Shuttle Table, 17" x 10" Ram, 20 HP Motor, Pump & Tank (Contact Ann Arbor #3859)
|
|
75 Ton Hydraulic Press 18" Stroke, 24" Daylight, 32" x 32" Overall Bed, 25" x 15" Between Posts, 25" x 22" Useable Bed, 4-1/4" Dia. Ram, $7,500 (Contact Ann Arbor #3784)
|
|
80 Ton HANNIFIN Gap Type 24" Max. Stroke, 36" Max. Daylight, 72" x 36" Bed & Ram both T-Slotted, with Safety Latches on Ram, 2 in stock (Contact Ann Arbor #3653)
|
|
90 Ton WILLIAMS & WHITE GAP TYPE 1963 12" Stroke, 26" Daylight, 34" x 21" Bed, 85/5/145 IPM, Wired for 6-Zone Heated Platens, "Updated" Allen Bradley PLC-5/15, SLC 500 and Panalview Controls, (Contact Ann Arbor #3278)
|
|
100 Ton DAKE Downacting 4-Post with Heated Platens (1965) 38" Stroke, 50" Daylight, 100" x 48" Bed, 175/33/405 IPM (Contact Nashville #3202)
|
|
100 Ton DAKE Downacting 4-Post Hydraulic Press Approx. 54" Stroke, 72" Daylight, 60" x 48" Overall Bed, 48" x 48" Useable Bed (Contact Ann Arbor #3940)
|
|
100 Ton HAMILTON 4-Post Hydraulic Press 24" Stroke, 42" Daylight, 101" x 44" Overall Bed, 90" x 44" Useable Bed, with Allen Bradley SLC 5/02 Conroller, with Safety Latches on Ram (Contact Ann Arbor #3898)
|
|
100 Ton HANNIFIN "Dyna-Quip" Gap Type Hydraulic Press (1978) 24" Stroke, 36" Daylight, 40" x 34" T-Slotted Bed & Ram, 19" Throat, 291/35/230 IPM (Contact Ann Arbor #3850)
|
|
100 Ton SPRINGFIELD 4-Post Transfer Compression Molding (1976) 10" Stroke, 30" Daylight, 30" x 33" Bed, Heated Platten Controls, Equipped with 2-Station Transfer Table and Ejectors, Reconditioned! (Contact Ann Arbor #2999)
|
|
125 Ton Rodgers 4-Post Type (1970) 18" Stroke, 22" Daylight, 37" x 29" Overall Bed & T-Slotted Ram, 26" Between Posts, 500/34/500 IPM, with Allen Bradley SLC/500 Controller, 3 in Stock! (Contact Ann Arbor #3797)
|
|
150 Ton HANNIFIN Gap Type 42" Max. Stroke, 48" Max. Daylight, 72" x 36" Bed & Ram both T-Slotted with Safety Latches on Ram (Contact Ann Arbor #3652)
|
|
150 Ton HERMAN SCHWABE Die Cutting Press (Like New) 10" Stroke, 23" Daylight, 77" x 32" Useable Bed & Ram, 86" x 32" Overall Bed, 75 HP Motor, Pump & Tank, AB Panelview 1200 AB 1394 Controller, Excellent! (Contact Ann Arbor #3885)
|
|
150 Ton LOGAN 4-Post Type Hydraulic Press 24" Stroke, 26" Daylight, 51" x 51" Overall Bed & Ram, 35" x 35" Between Posts (Contact Ann Arbor #3889)
|
|
150 Ton PH 4-Post Type Hydraulic Press (1993) 21" Stroke, 43" Daylight, 50" x 46" Overall Bed, 36" x 32" Between Posts, 225/25/177 IPM (Contact Ann Arbor #3953)
|
|
150 Ton WABASH 4-Post Hydraulic Press 20" Str, 36" Daylight, 48" x 60" Useable Bed, with Material Roll Feed Line (Contact Nashville #3900)
|
|
154 Ton WABASH 4-Post Upacting Hydraulic Press, #154-24TRM Transfer Molding Type (1965) 10½" Stroke, 40" x 26" Overall Bed, 28" x 14" Between Posts, with 2-26½" x 24" Heated Plattens to 600 F Deg., 65 Ton Transfer Ram-19¼" Downacting Stroke (Contact Ann Arbor #3851)
|
|
200 Ton BRUNO NO. FH200 4-Post TYPE (1997) 48" Stroke, 60" Daylight, 98" x 72" Overall Bed, equipped with 75" x 75" T-Slotted Bolsters, Solid State Controls, 3 in Stock, both presses are wired for Heated Platens! (Contact Ann Arbor #3890)
|
|
200 Ton ST. LAWRENCE 4-P0st 18½" Str, 35" Daylight, 84" x 48" Useable Bed & Ram, with Safety Latches on Ram, with Material Roll Feed Line (Contact Ann Arbor #3899)
|
|
200 Ton ST. LAWRENCE 4-Post 20" Stroke, 30" Daylight, 84" x 48" Useable Bed, with Safety Latches on Ram (Contact Ann Arbor #3901)
|
|
200 Ton SUMMIT 4-Post Type Hydraulic Press (1996) 48" Stroke, 60" Daylight, 135" x 75" Overall Bed & Ram(T-Slotted), 121" x 75" Usable Bed & Ram, Floor Standing, *Updated Allen Bradley Solid State Controls in 2008 (Contact Ann Arbor #3892)
|
|
200 Ton VERSON "Gib Guided" 40" Stroke, 84" x 48" Bed, 60" Daylight, w/100 Ton Hydraulic Cushion, $9,500 "AS IS" (Contact Ann Arbor #2500)
|
|
200 Ton VERSON 4-Post Molding Hydraulic Press 200 Ton Verson 4-Post Molding NO. 200-HD2-72-4P(1965) 54" Str., 80" DL, 88 x 48" Overall Bed 74" x 34" between Posts, 500/16/450 IPM, 2 in Stock (Contact Ann Arbor #3344)
|
|
200 Ton WALLACE ENGINEERING "4-Post" with Hydroforming Set-Up 48" Str, 72" Daylight, 60" x 48" Bed and Ram-Down Acting, Complete with Hydroforming Capability Power Unit and Updated Allen Bradley Controller (Contact Ann Arbor #3582)
|
|
230 Ton HERMAN SCHWABE Die Cutting Press (1993) 8" Stroke, 12-1/2" Daylight, 78" x 40" Bed & Ram, AB "Panelview", with 80" Wide Index Type Feed, 74" x 156" Feed Box plus 72" x 180" Transfer Table (Contact Ann Arbor #3877)
|
|
250 Ton O'TOOLE 4-Post Hydraulic Press 12" Stroke, 23" Daylight, 42" x 30" Overall Bed & Ram, 30" x 18" Between Posts, 150/75 IPM, Floor Mounted (Contact Ann Arbor #3879)
|
|
300 Ton "BLACK" Gap (1998) 14½" Stroke, 44" DL, 70" x 54" Bed, 40" x 16" Ram, $15,000.00 (Contact Ann Arbor #3425)
|
|
300 Ton BLISS (1973) 36" Stroke, 52" Daylight, 72" x 48" Bed, 1140/117/1140 IPM, "Updated" Touchscreen Controls-Under Power! 2 in Stock (Contact Nashville #3386)
|
|
300 Ton BLISS (1973) 36" Stroke, 52" Daylight, 72" x 48" Bed, 1140/117/1140 IPM, "Updated" Touchscreen Controls-Under Power! 2 in Stock (Contact Ann Arbor #3387)
|
|
300 Ton HPM 4 Post 23½" Stroke, 54" Daylight, 60" x 36" Bed & Ram, Flooor Standing (Contact Ann Arbor #3926)
|
|
300 Ton K.R. Wilson 4-Post Hydraulic Press (1968) 18" Stroke, 38" Daylight, 48" x 36" Bed & Ram, 36" x 23" Between Posts, Crown Mounted Hydraulics (Contact Ann Arbor #3828)
|
|
300 Ton SUTHERLAND 4-Post with Hydroforming Set-Up! (2003) 46" Str, 82" Daylight, 72" x 72" Bed & Ram, 1000 IPM, **with "HDT" Hydroforming Hydraulic Power Unit and A-B SLC 5/04 CPU Controller, Like New-2003! In Plant. (Contact Ann Arbor #3576)
|
|
300 Ton VERSON 300-HD2-120-60T (1991) 28" Stroke, 120" x 92" Bed, 82" Daylight, Video Available (Contact Ann Arbor #2747)
|
|
400 Ton MODERN No.13 Hobbing Press 4.5" Stroke-Upacting, 14" Daylight, 11" x 13" Overall Bed, 11" x 11" Between Posts, 10 HP Motor & Pumps (Contact Ann Arbor #3944)
|
|
500 Ton BROWN & BOGGS SH1-500-72-60 (2003) 18" Str, 55" Daylight, 72" x 60" Bed & Ram, 800 IPM, 52" Windows, *Updated Wintress SmartPac Press Control Like New Condition! (Contact Ann Arbor #3581)
|
|
500 Ton CAPITOL TECHNOLGIES Down Acting (2003) 26" Stroke, 62½" Daylight, 84" x 48", Floor Standing Base, 930/180/940 IPM, Excellent! (Contact Ann Arbor #3569)
|
|
500 Ton DAKE 2 Post (1971) 24" Stroke, 42" Daylight, 53" x 50" Bed, 54" x 24" Ram equipped with 2-53" x 50" T-Slotted Bolster Plates, 65/11/170 IPM, Floor Standing (Contact Ann Arbor #3927)
|
|
500/150 Ton GREENERD 4 Post Double Action Hydraulic Press No. GREENERD 4D-500/150-48X36 (1985) 20" Stroke, 40" Daylight, 72" X 36" Overall Bed, 48" X 36" Useable Bed, 500/55/570 IPM, Floor Standing (Contact Ann Arbor #3954)
|
|
700 Ton BERKEL Wood Laminating PRESS (1993) 6" Stroke, 6" Daylight, 128" x 78-1/2" Bed & Ram with Oil Heated Platens to approx. 400 Deg., with 78" Wide Mylar Belt Feed, with 2-Infeed Tables, 1-Outfeed Table (Contact Ann Arbor #3959)
|
|
1000 Ton KARDER 4-Post Up-Acting 40" max. Stroke, 72" max. Daylight (36" each-2 Openings) *Updated Hydraulics and Controls!, $19,500 (Contact Ann Arbor #3452)
|
| Guarantee | Payment Terms | Conditions of Sale |
| TWO LOCATIONS TO SERVE YOU | |
|
Ann Arbor Headquarters 3761 E. Ellsworth Road Ann Arbor, MI 48108 (734) 971-8860 Fax: (734) 971-9080 info@almamachinery.com |
Nashville Warehouse 841 Mayberry Springs Road Columbia, TN 38401 (615) 369-7788 Fax: (615) 369-7789 ken@almamachinery.com |