MAX. PUNCHING CAPACITY:     70 TON @60,000 TENSILE               
                               1-1/4" DIA. THRU 11/16" PLATE        
                               1" DIA. THRU 7/8" PLATE              
   SHEARING CAPACITY(FLATS):   3/8" X 18", 1/2" X 12-1/2", 3/4" X 8"
   ROUNDS:                     1-7/8" DIA.                          
   SQUARE:                     1-3/4"                               
   ANGLES(90 DEGREE):          5" X 5" X 1/2"                       
         (45 DEGREE):          4" X 4" X 3/8"                       
   SHEAR END COPING:           TEES 4" X 4" X 3/8"                  
   SQUARE NOTCH:               2-1/2" x 3-1/2" x 3/8"               
       90 DEG.COPE 3/8" X 1-3/4" DEEP-FLANGES OF BEAMS & CHANNELS   
   PUNCH END NOTCHER(90 DEG.): 3" TO 6" FLANGES OF BEAMS            
   (21" GAP)                   3" TO 5" FLANGES OF CHANNELS         
                               3" X  3" X 5/16" ANGLES, 5/16" PLATES
   HYDRAULIC UNIT:             15 HP MOTOR, PUMP & HYDRAULIC TANK   
   APPROX. DIMENSIONS/WEIGHT:  6-1/2' HIGH,7' RL,4' FB/8,000 LBS.   
   OPTIONAL EQUIPPED WITH:     6" X 4" X 1/2" 90 DEG ANGLE BLADES   
                               7" X 14.75# CHANNEL SHEAR ANGLE SEC. 
                               5" X 9.0# CHANNEL SHEAR BAR SECTION  
   *NOTE:  THIS MACHINE MAY BE INSPECTED UNDER POWER ON OUR FLOOR!  
   CONDITION: VERY GOOD!