USED MOLDING PRESSES
 |
Look for the Alma Machinery RECONDITIONED blue ribbon!
Every used press with this blue ribbon has been professionally
reconditioned by our experienced staff!
|
Click on an individual press name to view its full listing plus photos and video (if available)
 |
3 Ton 4-Post Air Press - with "Heated Platen"
22" Stroke, 18" Daylight, 72" x 31" Bed & Ram with "Heated Platen", 2 in Stock,
(Contact Ann Arbor #3532)
|
 |
40 Ton LANS 4-Post Hydraulic Press (2002)
18" Str, 28" DL, 60" x 36" Bed,
(Contact Ann Arbor #3820)
|
 |
50 Ton DAKE 4 Post (1984)
36" Max. Stroke, 48" Max. Daylight, 99" x 55" Bed & Ram, 86" RL between Posts, 670/42/450 IPM, Safety Latches on Ram, Floor STanding BAse, 2 in Stock,
(Contact Ann Arbor #3669)
|
 |
50 Ton TRIDENT 4 Post (One of 3 Press Cell) (1998)
18" Stroke, 54" Daylight, 71" x 44" Useable Bed, with Safety Latches on Ram, *Note: Will sell 1-press seperately!
(Contact Ann Arbor #3796)
|
 |
50 Ton WILLIAMS & WHITE 4-Post (1985)
40" Stroke, 47" Daylight, 84" x 36" T-Slotted Bed & Ram, 72" RL between Posts, Safety Latches, 2 in Stock,
(Contact Ann Arbor #3657)
|
 |
60 Ton Hamilton 4-Post Type Hydraulic Press
38" Stroke, 47" Daylight, 84" x 30" Useable Bed & Ram, with Material Roll Feed Line,
(Contact Ann Arbor #3902)
|
 |
60 Ton 4-Post Type Hydraulic Press
30" Stroke, 50" Daylight, 96" x 60" Useable Bed & Ram, with Pre-Heat Oven and Material Roll Feed Line!
(Contact Ann Arbor #3903)
|
 |
60 Ton SAVAGE 4-Post Type Molding Press
30" Stroke, 40" Daylight, 43" x 30" Bed, 30" x 17" Between Posts, *Equipped with 5" Dia. Ejector Cylinder in Base-8,
(Contact Ann Arbor #3829)
|
 |
80 Ton HANNIFIN Gap Type
24" Max. Stroke, 36" Max. Daylight, 72" x 36" Bed & Ram both T-Slotted, with Safety Latches on Ram, 2 in Stock,
(Contact Ann Arbor #3653)
|
 |
100 Ton SPRINGFIELD 4-Post Transfer Compression Molding (1976)
10" Stroke, 30" Daylight, 30" x 33" Bed, Heated Platten Controls, Equipped with 2-Station Transfer Table and Ejectors, Reconditioned!
(Contact Ann Arbor #2999)
|
 |
150 Ton HANNIFIN Gap Type Hydraulic Press
24" Max. Stroke, 36" Max. Daylight, 72" x 36" Bed & Ram both T-Slotted with Safety Latches on Ram,
(Contact Ann Arbor #3652)
|
 |
150 Ton WABASH 4-Post Hydraulic Press
20" Str, 36" Daylight, 48" x 60" Useable Bed, with Material Roll Feed Line,
(Contact Nashville #3900)
|
 |
154 Ton WABASH 4-Post Upacting Hydraulic Press, #154-24TRM Transfer Molding Type (1965)
10½" Stroke, 40" x 26" Overall Bed, 28" x 14" Between Posts, with 2-26½" x 24" Heated Plattens to 600 F Deg., 65 Ton Transfer Ram-19¼" Downacting Stroke,
(Contact Ann Arbor #3851)
|
 |

200 Ton BRUNO NO. FH200 4-POST TYPE (1997)
48" Stroke, 60" Daylight, 98" x 72" Overall Bed, equipped with 75" x 75" T-Slotted Bolsters, Solid State Controls, 3 in Stock, both presses are wired for Heated Platens!
(Contact Ann Arbor #3890)
|
 |
200 Ton ST. LAWRENCE 4-Post Hydraulic Press
20" Stroke, 30" Daylight, 84" x 48" Useable Bed, with Safety Latches on Ram,
(Contact Ann Arbor #3901)
|
 |

200 Ton SUMMIT 4-Post Type Hydraulic Press (1996)
48" Stroke, 60" Daylight, 135" x 75" Overall Bed & Ram(T-Slotted), 121" x 75" Usable Bed & Ram, Floor Standing, *Updated Allen Bradley Solid State Controls in 2008,
(Contact Ann Arbor #3892)
|
 |

200 Ton VERSON 4-Post Molding Hydraulic Press
200 Ton Verson 4-Post Molding NO. 200-HD2-72-4P(1965) 54" Str., 80" DL, 88 x 48" Overall Bed,
74" x 34" between Posts, 500/16/450 IPM, 2 in Stock
(Contact Ann Arbor #3344)
|
 |
200 Ton WALLACE ENGINEERING "4-Post" with Hydroforming Set-Up
48" Str, 72" Daylight, 60" x 48" Bed and Ram-Down Acting, Complete with Hydroforming Capability Power Unit and
Updated Allen Bradley Controller,
(Contact Ann Arbor #3582)
|
 |
300 Ton BLISS (1973)
36" Stroke, 52" Daylight, 72" x 48" Bed, 1140/117/1140 IPM, "Updated" Touchscreen Controls-Under Power! 2 in Stock,
(Contact Nashville #3386)
|
 |
300 Ton BLISS (1973)
36" Stroke, 52" Daylight, 72" x 48" Bed, 1140/117/1140 IPM, "Updated" Touchscreen Controls-Under Power! 2 in Stock,
(Contact Ann Arbor #3387)
|
 |
300 Ton SUTHERLAND 4-Post with Hydroforming Set-Up! (2003)
46" Str, 82" Daylight, 72" x 72" Bed & Ram, 1000 IPM, **with "HDT" Hydroforming Hydraulic Power Unit
and A-B SLC 5/04 CPU Controller, Like New-2003! In Plant.
(Contact Ann Arbor #3576)
|
 |
500 Ton BROWN & BOGGS SH1-500-72-60 (2003)
18" Str, 55" Daylight, 72" x 60" Bed & Ram, 800 IPM, 52" Windows, *Updated Wintress SmartPac Press Control,
Like New Condition!
(Contact Ann Arbor #3581)
|
 |
700 Ton BERKEL Wood Laminating PRESS (1993)
6" Stroke, 6" Daylight, 128" x 78-1/2" Bed & Ram with Oil Heated Platens to approx. 400 Deg., with 78" Wide Mylar Belt Feed,
with 2-Infeed Tables, 1-Outfeed Table,
(Contact Ann Arbor #3959)
|
 |
1000 Ton KARDER 4-Post Up-Acting
40" max. Stroke, 72" max. Daylight (36" each-2 Openings) *Updated Hydraulics and Controls!
(Contact Ann Arbor #3452)
|
| TWO LOCATIONS TO SERVE YOU
|
Ann Arbor Headquarters
3761 E. Ellsworth Road
Ann Arbor, MI 48108
(734) 971-8860
Fax: (734) 971-9080
info@almamachinery.com |
Nashville Warehouse
841 Mayberry Springs Road
Columbia, TN 38401
(615) 369-7788
Fax: (615) 369-7789
ken@almamachinery.com
|
|
|
|