Alma Machinery - The Dealer You Can Trust

Featuring the world's largest
inventory of reconditioned
stamping presses!
 
HOME
  
INVENTORY
  
NEW ARRIVALS
  
SEARCH
  
SPECIALS
  
NEWS
  
CONTACT
  
ABOUT
ALL
HIGHSPEED
STRAIGHTSIDE
OBI
HYDRAULIC
OAK EQUIP
AIR
OTHER

NEW ARRIVALS - ALL
Reconditioned Look for the Alma Machinery RECONDITIONED blue ribbon!
Every used press with this blue ribbon has been professionally
reconditioned by our experienced staff!
Click on an individual press name to view its full listing plus photos and video (if available)
Listed in reverse chronological order (most recent arrivals listed first)

Not Reconditioned
Not Reconditioned 4,000# x 18" LITTELL Motorized Reel #40-24 (1967)
4,000 Lb. x 24" Littell No. 40-24 Motorized Type 24" Wide, 20-24" I.D., 60" O.D., with Overarm, (Ann Arbor #3750)
Not Reconditioned 6,000# x 24" AMERICAN STEEL LINE Motorized Coil Reel (1985)
24" Wide, 20-24" I.D., 60" O.D., with Overarm, (Ann Arbor #3749)
Not Reconditioned 15" x .187" EGAN Stock Straightener (1972)
15" x .187" Straightener 6-Roll Type, with Vari-Speed Drive, (Ann Arbor #3748)
Not Reconditioned 110 Ton NIAGARA OBI Back Geared Press (1978)
5" Str, 19" Sh.Ht., 48" x 27" Bed, 40 SPM, with Air Cushion, (Chicago #3747)
Not Reconditioned 200 Ton NIAGARA OBI Back Geared Press (1973)
8" Str, 24" Sh.Ht., 58" x 34" Bed, 32 SPM, with Air Cushion, (Chicago #3746)
Not Reconditioned 45 Ton NIAGARA OBI Back Geared Press (1980)
3" Str, 12" Sh.Ht., 28" x 18" Bed, 65 SPM, with Air Cushion, (Chicago #3745)
Not Reconditioned 220 Ton NIAGARA #SE2-200-72-42UH (1991)
6" Str., 20" Sh.Ht., 72" x 42" Bed, 40-80 SPM, w/12" Feed, (Ann Arbor #3744)
Not Reconditioned 40 Ton PNEU-POWER 4-Post Air Cutoff Press No. 6P40 (1985)
0-3" Str, 8-12" Sh.Ht., 54" x 24" Useable Bed, 24" Between Posts, with Flying Cutoff, (Ann Arbor #3736)
Reconditioned 2,000# x 12" LITTELL Double End Reel-Plain Type #2012
12" Wide, 15"-20" I.D., 60" OD, with Electric Brakes, (Ann Arbor #3732)
Reconditioned 18" x .060" JACO 7-Roll Straightener
18" X Approx. .060" Capacity, 7-Roll Type, with Loop Control, (Ann Arbor #3733)
Reconditioned 6,500 LB. x 18" PERFECTO Double End Plain Coil Reel #RD6-148
14" Wide, 72" O.D., 16-20" I.D., Electric Brakes, (Ann Arbor #3713)
Reconditioned 4,000# x 18" PERFECTO Double End Plain Coil Reel (1988)
18" Wide, 48" O.D., 15-1/2" - 20-1/2" I.D., Electric Brakes, (Ann Arbor #3712)
250 Ton MINSTER OBI Back Geared Press (1961)
4" Stroke, 20" Shut Height, 49" x 26" Bed, 60 SPM, Very Good, (Chicago #3730)
Not Reconditioned 400 Ton MINSTER SSDC Press (1962)
8" Stroke, 30" Shut Height, 98" x 36" Bed, 18-42 SPM, 30" Windows, New Siemens Variable Frequency Drive, Rebuilt Clutch, Very Good, (Chicago #3731)
Not Reconditioned 175 Ton LAKE ERIE 4-Post
36" Str., 36" DL, 36" x 37½" Overall Bed & Ram, 36" Daylight, Excellent! (Ann Arbor #3710)
Not Reconditioned 200 Ton RODGERS 4-Post Hydraulic Press
36" Str., 38-1/2" DL, 64" x 48" Overall Bed & Ram, 48" x 33" Between Posts, Floor Standing, Excellent, (Ann Arbor #3711)
Not Reconditioned ½ Ton 4-Post Down-Acting Air Press
12" Str., 12" DL, 23" x 24" Overall Bed, 18" x 14" Ram Area, 13" x 9" Between Posts, 2 in Stock, (Ann Arbor #3536)
Not Reconditioned 1.4 Ton 4-Post Down-Acting Air Press - with "Heated Platen"
24" Str., 18" DL, 33-1/2" x 20-1/2" Overall Bed, 29" x 15-1/2" Between Posts, with Safety Latches on Ram (Ann Arbor #3533)
Not Reconditioned 1 Ton 4-Post Down-Acting Air Press
12" Str., 20-1/2" DL, 87" x 62" Overall Bed & Ram Area, 66" x 36" Between Posts, with Safety Latches on RAm and Light Curtains, (Ann Arbor #3546)
Not Reconditioned 60 Ton PRECISION FLEX-O-PRESS High Speed Press (1966)
2" Str., 24" Sh.Ht., 30" x 24" Bed, 90-360 SPM, with "Updated" Bliss Advantage 3 Controls & Light Curtains, Excellent! (Ann Arbor #3553)
Not Reconditioned 500 Ton MINSTER "HeviStamper" Straight Side Double Crank Press (1970)
6" Str., 27" Sh.Ht., 60" x 48" Bed, 40-100 SPM-Geared!, 30" Windows, Complete! (Chicago #3650)
Not Reconditioned 6 Ton DENISON GAP FRAME HYDRAULIC PRESS (1966)
10" Str., 16" DL, 17" x 10" Bed, Floor Standing Base, with Motor & Controls, (Ann Arbor #3631)
Not Reconditioned 1 Ton DENISON GAP FRAME HYDRAULIC PRESS (1966)
6" Str., 8" DL, 10" x 9" Bed, Bench Type, 110 Volt, (Ann Arbor #3630)
Not Reconditioned 200 Ton BLOW Straight Side Double Crank Press (1980)
10" Str., 20" Sh.Ht., 96" x 36" Bed, 20-60 SPM, 19" Windows, with Air Cushions in Floor Standing Base, (Ann Arbor #3709)
Not Reconditioned 45 Ton BLISS OBI Back Geared Press (1973)
4" Stroke, 12" Shut Height, 30" X 17" Bed, 45-90 SPM, (Chicago #3684)
Not Reconditioned 8,000# x 18" x .267" LITTELL Combination Cradle/Straightener (1961)
20" x .156" 5-Roll Straightener, 60" OD, Loop Controll, (Ann Arbor #3726)
Not Reconditioned 8,000# x 18" x .267" PERFECTO Combination Cradle/Straightener
18" x .025"-.267" Straightener, 600 IPM, (Ann Arbor #3725)
Not Reconditioned 4,000 LB. x 18" BLISS Combination Cradle/Straightener
18" x .171" Straightener, 200-800 IPM, Vari-Speed, (Ann Arbor #3724)
Not Reconditioned 10,000# x 24" x .187" SESCO Combination Cradle/Straightener
24" x .062"-.287" 7-Roll Straightener, 10-60 FPM, 60" OD, Coil Car, Threading Table, (Ann Arbor #3723)
Not Reconditioned 50 Ton K.R. WILSON Adjustable H-FRAME Testing Press (1988)
12" Stroke, Adjustable Bed, (Ann Arbor #3717)
Not Reconditioned 600 Ton MINSTER HeviStamper Straight Side double Crank Press (1965)
10" Str., 26" Sh.Ht., 48" x 36" Bed, 12-25 SPM, 25" Windows, with updated "Omni-Link" controls, (Ann Arbor #3716)
Not Reconditioned 400 Ton MINSTER Straight Side Single Crank Press (1972)
10" Str., 31" Sh.Ht., 36" x 48" Bed, 60 SPM, (Ann Arbor #3728)
Not Reconditioned 400 Ton MINSTER HEAVISTAMPER Straight Side Double Crank Press (1980)
4" Str, 26" Sh.Ht., 54" x 42" Bed, 50-100 SPM, 26" Windows, equipped with 20" Rowe Servo Feed, (Ann Arbor #3721)
Not Reconditioned 400 Ton MINSTER HEAVISTAMPER Straight Side Double Crank Press (1978)
4" Str, 26" Sh.Ht., 54" x 42" Bed, 50-100 SPM, 26" Windows, (Ann Arbor #3720)
Not Reconditioned 400 Ton MINSTER HEAVISTAMPER Straight Side Double Crank Press (1980)
8" Str., 38" Sh.Ht., 120" x 48" Bed, 0-90 SPM-Geared, 30" Windows, with 24" Minster No. EMF-624 Servo Feeder, (Ann Arbor #3719)
Not Reconditioned 200 Ton MINSTER Straight Side Double Crank Press (1975)
3" Str., 22" Sh.Ht., 48" x 44" Bed, 45-90 SPM-Geared, 20" Windows, with Air Cushion, (Ann Arbor #3718)
Not Reconditioned 200 Ton NIAGARA Straight Side Double Crank Press (1972)
6" Str., 20" Sh.Ht., 72" x 42" Bed, 40-80 SPM, w/12" Feed, (Ann Arbor #3727)
Reconditioned 110 Ton BLISS OBI Back Geared Press (1972)
6" Str., 17" Sh.Ht., 42" x 27" Bed, with Quick Die Change, Air Cushion, Rebuilt Ram & Clutch! 3 in Stock, (Chicago #3651)
Not Reconditioned 60 Ton ROUSSELLE Gap Frame, Doiuble Crank Press (1982)
5" Stroke, 13" Shut Height, 76" x 18" Bed, 50 SPM, Air Clutch, (Chicago #3715)
Not Reconditioned 24 Ton WALSH OBI Flywheel Press (1965)
1½-2" Str., 9" SH, 22" x 12" Bed, 90-180 SPM, Air Clutch, Very Good, (Chicago #3634)
Not Reconditioned 45 Ton MINSTER OBI Flywheel Press (1959)
5" Stroke, 11½" Shut Height, 28" x 18" Bed, 60-120 SPM, (Chicago #3707)
Not Reconditioned 45 Ton MINSTER OBI Flywheel Press (1960)
5" Stroke, 11¾" Shut Height, 32" x 21" Bed, 50 SPM, (Chicago #3706)
Not Reconditioned 45 Ton MINSTER OBI Flywheel Press (1960)
4" Stroke, 11½" Shut Height, 28" x 18" Bed, 50 SPM, (Chicago #3705)
Not Reconditioned 45 Ton MINSTER OBI Flywheel Press (1971)
4" Stroke, 15½" Shut Height, 32" x 21" Bed, 90-180 SPM, (Chicago #3704)
Not Reconditioned 45 Ton MINSTER OBI Flywheel Press (1968)
4" Stroke, 11-1/2" Shut Height, 28" x 18" Bed, 60-120 SPM, (Chicago #3703)
Reconditioned 60 Ton BLISS OBI Back Geared Press (1983)
4" Stroke, 15" Shut Height, 32" X 21" Bed, 60 SPM, Reconditioned, Excellent! (Chicago #3683)
Not Reconditioned 16 Ton MINSTER Flywheel Type Press, No 2F (1952)
¾" Stroke, 8½" Shut Height, 17" x 10" Bed, 150 SPM, Air Clutch, (Chicago #3633)
Not Reconditioned 8 Ton HANNIFIN Hydraulic Press (1973)
6" Str, 15" Daylight, 22-1/4" x 14-1/2" Bed, (Chicago #3699)
Not Reconditioned 60 Ton MINSTER OBI Flywheel Press (1988)
4" Stroke, 16" Shut Height, 32" x 21" Bed, 120 SPM, Air Clutch (Chicago #3695)
Reconditioned 60 Ton MINSTER OBI Flywheel Press (1985)
4" Stroke, 16" Shut Height, 32" x 21" Bed, 100 SPM, Air Clutch, Reconditioned, Excellent! (Chicago #3694)
Not Reconditioned 60 Ton MINSTER OBI Flywheel Press (1954)
4" Stroke, 13" Shut Height, 32" x 21" Bed, 100 SPM, Air Clutch, (Chicago #3693)
Not Reconditioned 500 Ton WILLIAMS & WHITE Down Acting Hydraulic Press (1990)
10" Stroke, 24" Daylight, 40" x 30" Bed, 1000 IPM Fast Close, 5-40 IPM Pressing, Excellent! (Ann Arbor #3697)
Not Reconditioned 110 Ton MINSTER OBI Back Geared Press (1989)
8" Stroke, 22" Shut Height, 42" x 27" Bed, 60 SPM, Excellent! (Chicago #3696)
Not Reconditioned 45 Ton MINSTER OBI Flywheel Press (1966)
3" Stroke, 10¾" Shut Height, 28" x 18" Bed, 100-200 SPM, Very Good , (Chicago #3691)
Not Reconditioned 110 Ton MINSTER OBI Back Geard Press (1965)
8" Stroke, 22" Shut Height, 42" x 27" Bed, 35-70 SPM, Cushion, Very Good, (Chicago #3682)
Reconditioned 4,000# x 18" PERFECTO REEL & STRAIGHTENER (1978)
18" x .115" Capacity, 48-60" OD, 3/4 Straightener, Reconditioned, Excellent! (Chicago #3646)
Not Reconditioned 60 Ton BLISS #21-1/2 (1954)
9" Stroke, 18" Shut Height, 32" x 22" Bed, 75 SPM, Link Control (Chicago #3415)
Reconditioned 80 Ton FEDERAL Back Geared Press (1969)
4" Stroke, 13½" Shut Height, 36" X 28" Bed, 30-60 SPM, Excellent, Reconditioned, (Chicago #3637)
Not Reconditioned 45 Ton MINSTER Flywheel Type Press (1959)
3" Stroke, 30" x 19" Bed, 11-½" Shut Height, 45-90 SPM, (Chicago #3685)
Not Reconditioned 75 Ton MINSTER "DIE-NAMIC SUPERSTOCK" Flywheel Press, with Cushion (1970)
4" Str., 21" Sh.Ht., 36" x 24" Bed, 90 SPM, 4" Powered Adjustment, with 18 Ton Air Cushion, Excellent! (Ann Arbor #3687)
Not Reconditioned 30" X .080 COE Servo Press Feed(2001)
30" Wide, 340 FPM, 0-99.999 Feed Length, Cabinet Type, 2 in stock, Excellent! (Chicago #3578/80)
Not Reconditioned 32 Ton MINSTER #B1-32 Hi-Speed Gap Type Press
2" Str, 9½" Sh. Ht., 24" X 15" Bed, 200-400 SPM, with 5" Roll Feed, 5 in Stock, (Ann Arbor #3664)
Reconditioned 220 Ton NIAGARA Straight-Side Dbl. Crank Press (1992)
6" Str., 25" Sh. Ht., 72" x 42" Bed, 50-100 SPM-Geared, 26" Windows, with 18"x.125" CWP Servo Feed, Hyd. Overloads, 2 in Stock, (Ann Arbor #3692 & Chicago #3686)
Reconditioned 250 Ton MINSTER High Speed Press (1971)
3" Str, 25" Sh.Ht., 72" x 36" Bed, 0-150 SPM, 23" Windows, 16" Roll Feed, 2 in Stock, (Ann Arbor #3690)
Reconditioned 60 Ton BLISS Flywheel Type Press (1966)
4" Stroke, 14-1/4" Shut Height, 32" x 21" Bed, 100 SPM, Light Curtains, Reconditioned, Very Good (Chicago #3589)
Reconditioned 60 Ton MINSTER Flywheel Type Press (1980)
4" Stroke, 16" Shut Height, 32" x 21" Bed, 45-90 SPM, Reconditioned, Excellent!! (Chicago #3549)
Reconditioned 110 Ton BLISS OBI Back Geared Press (1972)
6" Stroke, 17" Shut Height, 42" x 27" Bed, 25-45 SPM, with Shadow V Wintriss Light Curtains, 2 in stock, Reconditioned, Excellent! (Chicago #3571)
Reconditioned 150 Ton VERSON Straight Side Double Crank Press (1968)
8" Stroke, 18" Shut Height, 72" x 48" Bed, 25-50 SPM, 72" WW, (Chicago #3676)
Not Reconditioned 50 Ton DAKE 4 Post Hydraulic Press (1984)
36" Max. Stroke, 48" Max. Daylight, 99" x 55" Bed & Ram, 86" RL between Posts, 670/42/450 IPM, Safety Latches on Ram, (Ann Arbor #3669)
Not Reconditioned 150 Ton CENTURY 4-Post (2003)
16" Max. Stroke, 36" Max. Daylight, 106" x 44" Bed & Ram 85" RL between Posts, *with 5-Zone Heated Shuttle Table 72" x 42", Safety Latches on Ram, (Ann Arbor #3671)
Not Reconditioned 230 Ton HAMILTON 4-Post
42" Str, 48-60" Daylight, 120"x56" Overall Bed and Ram, 104" RL between posts, Safety Latches on Ram, Floor Standing, (Ann Arbor #3673)
Not Reconditioned 150 Ton HANNIFIN Gap Type Hydraulic Press
24" Max. Stroke, 36" Max. Daylight, 72" x 36" Bed & Ram both T-Slotted with Safety Latches on Ram, (Ann Arbor #3652)
Not Reconditioned 80 Ton HANNIFIN Gap Type Hydraulic Press
24" Max. Stroke, 36" Max. Daylight, 72" x 36" Bed & Ram both T-Slotted, with Safety Latches on Ram, (Ann Arbor #3653)
Reconditioned A video of this press can be viewed on this web site. 50 Ton WILLIAMS & WHITE 4-Post Hydraulic Press (1985)
36" Stroke, 46" Daylight, 84" x 36" T-Slotted Bed & Ram, 72" RL between posts, Safety Latches, Air Cushions, 6 in stock, (Ann Arbor #3654)
Not Reconditioned 10,000# x 24" x .134" LITTELL Model No. 626D (1981)
24" x .060"-.134", 12"x.194", 8"x.250" 5-Roll Straightener, 18-108 FPM, Cradle with Coil Car, (Ann Arbor #3681)
Reconditioned 4,000# x 42" COE "POWERED" DOUBLE END REEL & STRAIGHTENER (1991)
42" x .060" 7-Roll Straightener, 4000 Lb. x 42" Hydraulic Reel with Hyd. Expansion 16-21" I.D., 60" OD, (Ann Arbor #2749)
Reconditioned 4,000# x 12" LITTELL PRECISION COIL REEL & MINSTER STRAIGHTENER (1986)
12" x .015"-.080" Minster 17-Roll Straightener Vari-Speeds to 3600 IPM, 4,000 Lb. x 12" Littell Double End Reel-Plain Type, (Ann Arbor #3627)
Not Reconditioned 3,000# x 8" PERFECTO DOUBLE END COIL REEL & 17 ROLL "PRECISION" STRAIGHTENER, (1985)
8" x .020"-.125" Perfecto 17-Roll Straightener, w/vari speeds 0-2400 IPM, 3,000 Lb. x 12" Double End Reel, (Ann Arbor #3611)
Reconditioned 3,000# x .080" MINSTER/PERFECTO COIL REEL & STRAIGHTENER
6" x .015"-.080" 17 Roll Minster No. MHS Straightener, with variable speed & "S" loop, 3,000 Lb.x 12" Perfecto Dbl End Plain Reel, 4 in Stock! (2-Chicago, 2-Ann Arbor #3613)
Reconditioned 1,000# x 12" LITTELL Coil Reel #10 - Motorized
12" Wide, 12-21" I.D., 48" O.D., Can also be used Horizontally, (Ann Arbor #3622)
Reconditioned 13,500# x 36" PERFECTO Coil Reel and Straightener (1980)
36" x .060" or 20" x .090" Servo Feeder, 36" Wide Reel, 60" OD, 19-24" Hyd. Expansion, 7-Roll 36" x .090", 60-1200 IPM Straightener, Complete Line! (Ann Arbor #3741)
Reconditioned 200 Ton JOHNSON Gap Frame Double Crank Press (1968)
6" Stroke, 72" x 30" Bed, 30 SPM, (Ann Arbor #3680)
Not Reconditioned 80 Ton FEDERAL Flywheel Type Press
4" Str, 13-1/2" Sh.Ht., 36" x 28" Bed, 75 SPM, with Air Cushion in bed, (Ann Arbor #3677)
Reconditioned 60 Ton NIAGARA Back Geared OBI Press (1980)
3½" Str, 14" Sh.Ht., 32" x 21" Bed, 60 SPM, with Air Cushion in Bed, (Ann Arbor #3678)
Reconditioned 150 Ton NIAGARA HIgh Speed Press (1975)
5" Stroke, 22" Sh.Ht., 48" x 30" Bed, 55-110 SPM-Geared, 18" Windows, with 10" x .125" Double Roll Feed & Scrap Chopper, (Ann Arbor #3617)
Not Reconditioned 200 Ton BROWN & BOGGS Straight-Side Dbl. Crank Press (1975)
6" Str, 21" Sh.Ht., 72" x 42" Bed, 30-60 SPM, Windows, (Ann Arbor #3639)
Reconditioned 45 Ton BLISS Flywheel Type Press (1970)
3" Stroke, 30" x 18" Bed, 12" Shut Height, approx 100 SPM, with 4" wide Servo Feed Line, (Ann Arbor #3649)
Reconditioned 60 Ton ROUSSELLE, Gap Double Crank Press
5-6" Stroke, 12-13" Shut Height, 76" x 18" Bed, 50 SPM, Reconditioned, Excellent, (Chicago #3473)
Not Reconditioned 80 Ton ROUSSELLE SSDC Press
3" Str, 13" SH., 60" x 30" Bed, 50 SPM, 14" Windows, (Chicago #3472)
Not Reconditioned 30 Ton MINSTER High Speed Press
2" Stroke, 11½" Shut Height, 24" x 19" Bed, 100-300 SPM, w/3" W Littell Single Roll Feed, (Chicago #3632)
Not Reconditioned 32 Ton MINSTER High Speed Press (1959)
½" Stroke, 10½" Shut Height, 22" x 15" Bed, 100-200 SPM, $14,500, Nice! (Chicago #3636)
Not Reconditioned 12,000# x 40" ROWE Motorized Reel
40" Wide, 60" O.D., 19-24.5" I.D., Hydraulic Expansion, Very Good, (Chicago #3579)
Not Reconditioned 12,000# x 42" ROWE Motorized Reel
42" Wide, 60" O.D., 19-24.5" I.D., Hydraulic Expansion, Very Good (Chicago #3577)
Not Reconditioned 6,000# x 18" x .250" LITTELL Coil Cradle & Straightener (1985)
18" Wide, 60" O.D, 2/3 Rolls, Hold Down Arm, Air, 19" Wide Straightener, to .250" Thick, Very Good, (Chicago #3463)
Not Reconditioned 35 Ton NIAGARA OBI Back Geared Press (1973)
2" Str, 11" Sh. Ht., 24" x 15" Bed, 65-130 SPM, Updated Controls, 2 in Stock, Reconditioned, Excellent! (Ann Arbor #3628)
Not Reconditioned 35 Ton NIAGARA OBI Back Geared Press (1973)
2" Str, 11" Sh. Ht., 24" x 15" Bed, 65-130 SPM, Updated Controls, 2 in Stock, Reconditioned, Excellent! (Chicago #3629)
Reconditioned A video of this press can be viewed on this web site. 60 Ton MINSTER Flywheel Type Press (1970)
4" Str, 15½" Sh.Ht., 32" x 21" Bed, 90-180 SPM, (Ann Arbor #3614)
Not Reconditioned A video of this press can be viewed on this web site. 121 Ton KOMATSU, Gap Frame Double Crank Press (1987)
7.09" Stroke, 20.5" Shut Height, 71" x 19.9" Bed, 35-70 SPM, Excellent! (Chicago #3607)
Reconditioned A video of this press can be viewed on this web site. 220 Ton STAMTEC, Gap Frame Double Crank Press (1999)
9.84" Stroke, 19.69" Shut Height, 94-1/2" x 33" Bed, 25-45 SPM, Wintress Die Protection, Like New!!!, Reconditioned, (Chicago #3638)
Not Reconditioned 110 Ton VERSON OBI Back Geared Press (1973)
6" Stroke, 19" Shut Height, 42" x 27" Bed, 75 SPM, Cushion, Updated Controls, Very Good, (Chicago #3644)
Not Reconditioned 220 Ton AIDA OBI Back Geared Press (1978)
9.8" Stroke, 17.7" Shut Height OB, 69.6" X 33" Bed, 35 SPM, Updated Controls, Very Good, (Chicago #3643)
Not Reconditioned A video of this press can be viewed on this web site. 500 Ton BLISS Straight Side Single Crank Press (1970)
8" Stroke, 27" Shut Height, 42" x 48" Bed, 20-40 SPM Variable, 30" Windows, Updated Controls, Excellent!! (Chicago #3642)
Not Reconditioned A video of this press can be viewed on this web site. 400 Ton VERSON Straight Side Double Crank Press (1956)
14" Stroke, 38 1/2" Shut Height, 54" x 48" Bed, 15-30 SPM Variable, 27" Windows, Updated Controls, (Ann Arbor #3641)
Reconditioned 4,000# x 12" LITTELL Coil Reel (1977)
4,000 Lb. x 12" Wide, 15-20" I.D., 60" O.D., W/Electric Brake, Reconditioned, Excellent! (Chicago #3605)
Not Reconditioned 4,000# x 18" LITTELL Motorized Reel #40-18 (1990)
4,000 Lb. x 18" Wide, 15-20" I.D., 60" O.D., Hydraulic Expansion, (Ann Arbor #3566)
Reconditioned 300 Ton BLISS High Speed Press (1981)
8" Str., 24" Shut Ht., 72" x 42" Bed, 50-100 SPM-Geared, 27" Windows, with 12" Servo Feed, (Ann Arbor #3615)
Reconditioned 12" X .090 COE Servo Feed (1991)
12" Wide, 300 FPM, 0-99.999 Feed Length, Cabinet Type, Reconditoned, Excellent!, 2 in stock, (Chicago #3586)
Not Reconditioned 8,000# x 18" x .125 CWP Coil Reel and Straightener (1981)
18" Wide, 13-21" I.D, 60" O.D. Reel, with Electric Brake, 18" x .125" 7-Roll Straightener, (Ann Arbor #3361)
Not Reconditioned 20" x .105" ROWE Straightener (1998)
20" Wide, 7-Roll (3/4), Entry/Exit Pinch Rolls, (Chicago #3594)
Not Reconditioned 6,000# x 30" LITTELL #60-30 Coil Reel(1957)
30" Wide, 16-20" I.D., 60" O.D., W/Electric Brake, 2 Coil Keepers, Very Good, (Chicago #3593)
Reconditioned 60 Ton BLISS Flywheel Press (1972)
¼" - 3½" Stroke, 15" Shut Height, 32" x 21" Bed, 50-100 SPM, Reconditioned, Excellent! (Chicago #3550)
Not Reconditioned 6,000# x 36" AMERICAN STEEL LINE Motorized Coil Reel (1976)
6,000 Lb. x 36" Wide, 16-20" I.D., 60" O.D., Variable Speed, Hydraulic Expansion, Very Good, (Chicago #3591)
Not Reconditioned A video of this press can be viewed on this web site. 500 Ton BROWN & BOGGS Hydraulic Press (2003)
18" Str, 55" Daylight, 72" x 60" Bed & Ram, 800 IPM, 52" Windows, *Updated Wintress SmartPac Press Control, Like New Condition! (Chicago #3581)
Not Reconditioned A video of this press can be viewed on this web site. 300 Ton SUTHERLAND 4-Post with Hydroforming Set-Up! (2003)
46" Str, 82" Daylight, 72" x 72" Bed & Ram, 1000 IPM, **with "HDT" Hydroforming Hydraulic Power Unit and A-B SLC 5/04 CPU Controller, Like New-2003! In Plant. (Ann Arbor #3576)
Not Reconditioned A video of this press can be viewed on this web site. 200 Ton WALLACE ENGINEERING "4-Post" Hydraulic Press
48" Str, 72" Daylight, 60" x 48" Bed and Ram-Down Acting, Complete with Hydroforming Capability Power Unit and Updated Allen Bradley Controller,(Ann Arbor #3582)
Reconditioned 300 Ton VERSON Straight Side Double Crank Press (1988)
8" Str., 31" Sh.Ht., 120" x 48" Bed, 15-45 SPM, 33" Windows, 2-Air Cushions with Floor Standing Base, (Ann Arbor #3583)
Not Reconditioned 500 Ton CAPITOL TECHNOLGIES Down Acting Hydraulic Press (2003)
26" Stroke, 62½" Daylight, 84" x 48", Floor Standing Base, 930/180/940 IPM, Excellent! (Ann Arbor #3569)
Not Reconditioned 350 Ton CAPITOL TECHNOLGIES Hydraulic Press (2002)
26" Str, 67" Daylight, 84" x 48" T-Slotted Bed & Ram, Floor Standing Base, 930/180/950 IPM, Like New, 2 in Stock! (Ann Arbor #3567)

Headquarters
3761 E. Ellsworth Road
Ann Arbor, MI 48108
(734) 971-8860
Fax: (734) 971-9080
info@almamachinery.com		 Chicago Warehouse
3201 N. Wolf Road
Franklin Park, IL 60131
(847) 451-8868
Fax: (847) 451-8871
almamachinery@midwestnet.com
 
Please contact us for a copy of our latest printed catalog.