Featuring the world's largest inventory of reconditioned stamping presses

NEW ARRIVALS - OTHER EQUIPMENT

Look for the Alma Machinery RECONDITIONED blue ribbon! Every used press with this blue ribbon has been professionally reconditioned by our experienced staff!

Click on an individual press name to view its full listing plus photos and video (if available)
Listed in order of tonnage.

		18" X .093" COOPER WEYMOUTH 7-Roll Straightener (1972) 18" X .093" Capacity 7-Roll Straightener, Entry/Exit Pinch Rolls, Variable Speed, Reconoditioned, (Contact Nashville #4052)
		4,000# x 18" COE Motorized Reel #CPR-4018 18" Wide(24" Actual), 72" O.D., 15-21" I.D., Variable Speed Drive, with Air Operated Overarm, Loop Control, (Contact Ann Arbor #3951)
		6,600# x 23.6" AIDA NO. LFS-60R-II Double End Reel with Servo Feeder & Straightener (1987) 6,600 LB. X 23.6" Double End Reel, 16-20" I.D. with Hyd. Expansion, Overarms, 23.6" x .020"-.170" Powered Straightener, *2 Complete Lines in Stock!! (Contact Ann Arbor #3963)
		8,000 lb x 12" PERFECTO Coil Reel and Straightener 12" x .030"-.180" 5-Roll Straightener, 8,000 Lb. x 18" Reel with Hydraulic Expansion, Overarm, (Contact Ann Arbor #3854)
		8,000 lb x 12" x .180 PERFECTO Coil Reel and Straightener, 12" x .180" Press Mounted Servo Feed (2001) .030"-.180" 5-Roll Straightener & 8,000 Lb. x 18" Reel with Hydraulic Expansion, Overarm, (Contact Ann Arbor #3853)
		8,000# x 18" Cooper Weymouth - Plain (1996) 8,000 Lb. x 18" Wide, 13-21" I.D., 60" O.D., Air Brake, Very Good, (Contact Nashville #4053)
		13,000# x 18" x .225" PERFECTO Comb. Reel/Straightener 18" x .225" 7-Roll Straightener, 13,000 Lb. x 24" Reel & Coil Car, with 20" x .105" PA Ind. Servo Feed (2002), 2 Complete Feed Lines in Stock, (Contact Ann Arbor #3785)
		60 Ton ROUSSELLE GAP Double Crank Press, #6B76 4" Str, 13-1/2" Sh.Ht., 76" x 18" Bed, 50 SPM (Contact Nashville #4178)
		100 Ton ROUSSELLE GAP Double Crank Press (1972) 6" Stroke, 18" Shut Height, 60" x 22" Bed, 50 SPM, Air Clutch, Reconditioned, Excellent! (Contact Nashville #3867)
		121 Ton KOMATSU MODEL NO. OBW 110-2 D.C. GAP (1984) 7" Stroke, 20.5" Sh.Ht., 71" x 27.5" Bed, 35-70 SPM, 57" Between Uprights, with Hydraulic Overloads, Automatic Lubrication, Reconditioned (Contact Nashville #3962)
		121 Ton SUTHERLAND GAP Double Crank, Mark 2-121-2W (2000) 7" Stroke, 21.6" Shut Height, 74" x 27" Bed, 35-65 SPM, Air Clutch, w/Feed, Reconditioned, Excellent! (Contact Nashville #3936)
		220 Ton STAMTEC Gap Frame, Double Crank Press, #G2-200 (1987) 10" Str., 24" Sh.Ht., 98" x 32" Bed, 25-50 SPM, Cushions, Reconditioned, Excellent! (Contact Nashville #3996)
		250 Ton MINSTER Knuckle Joint Press #90-250 with Bottom Knockout! 6" Stroke, 15-1/2" Sh.Ht., 18" x 24" Bed, 45 SPM, equipped with *Updated "Wintress" Solid State Controls and Crank Actuated Bottom Knockout, Reconditioned! (Contact Ann Arbor #4159)