Alma Machinery - The Dealer You Can Trust

Featuring the world's largest
inventory of reconditioned
stamping presses
HOME
  
INVENTORY
  
NEW ARRIVALS
  
SEARCH
  
SPECIALS
  
NEWS
  
CONTACT
  
ABOUT

USED O.B.I. PRESSES

Reconditioned Look for the Alma Machinery RECONDITIONED blue ribbon!
Every used press with this blue ribbon has been professionally
reconditioned by our experienced staff!
BACK GEARED PRESSES
FLYWHEEL TYPE PRESSES

O.B.I. BACK GEARED PRESSES
Click on an individual press name to view its full listing plus photos and video (if available)

Reconditioned 60 Ton MINSTER No. 70-4 Gap Type (1963)
6" Str, 16½" Sh.Ht., 32" x 21" Bed, 20-60 SPM Variable Speed Drive, Air Counterbalanced Ram,
(Contact Ann Arbor #3779)
Reconditioned 60 Ton MINSTER #6 (1979)
4" Stroke, 16" Shut Height, 32" x 21" Bed Area, 0-90 SPM, Reconditioned, Excellent!
(Contact Nashville #3884)
Not Reconditioned 60 Ton NIAGARA Back Geared Press No. M-60 (1966)
4" Str., 19" Sh.Ht., 32" x 21" Bed, 45 SPM, equipped with updated Wintress WPC Solid State Controls,
(Contact Ann Arbor #3906)
Reconditioned 66 Ton KOMATSU NO. OBS-60-2 OBI Back Geared Press (1984)
4.7" Stroke, 16" Sh.Ht., 34" x 18.5" Bed, 42-85 SPM Variable Speed, Powered Ram Adjustment, Hydraulic Overloads, 2 in Stock, Reconditioned
(Contact Nashville #3960)
Reconditioned 66 Ton KOMATSU NO. OBI-60 OBI Back Geared Press (1982)
4.7" Stroke, 15" SH, 31" x 21" Bed, 35-70 SPM, 2 in Stock, Reconditioned,
(Contact Nashville #3961)
Reconditioned 70 Ton BLISS #OBG-70 OBI Back Geared Press (1987)
4" Stroke, 15½" Shut Height, 32" x 21" Bed Area, 60 SPM, w/hydraulic overloads in the ram, Very Good, Reconditioned,
(Contact Nashville #3848)
Not Reconditioned 70 Ton BLISS #OBG-70 OBI Back Geared Press (1985)
4" Stroke, 18" Shut Height, 32" x 21" Bed Area, 60 SPM, w/hydraulic overloads in the ram,
(Contact Nashville #4181)
Not Reconditioned 71 Ton MINSTER D.C. OBI #60-4-1/2-38 BACK GEARED
4" Stroke, 14" Sh.Ht., 53" x 22" Bed, 40 SPM, 38" x 21" Ram Area, 36½" Between Uprights, Motor and Controls,
(Contact Ann Arbor #4064)
Reconditioned 100 Ton NIAGARA #E-90-S (1986)
4½" Stroke, 15¾" Shut Height, 39" x 25" Bed, 46 SPM, with Air Cushion, Reconditioned, Very Good,
(Contact Nashville #3426)
Not Reconditioned 100 Ton ROUSSELLE Gap Frame Double Crank Press, #10B60
6" Stroke, 15" Sh.Ht., 60" x 22" Bed, 55 SPM, 40" Between Uprights, Air Clutch and Brake, Twin Gear Drive,
(Contact Ann Arbor #3983)
Not Reconditioned 105 Ton VERSON No. 7S OBI Back Geared Press
8" Str., 18" Sh.Ht., 38" x 29" Bed, 30 SPM, with Wintress "WPC" Solid State Controls,
(Contact Ann Arbor #3905)
Reconditioned 110 Ton BLISS #C-110 (1983)
8" Str, 15" Sh.Ht., 42" x 27" Bed Area, 40 SPM, Reconditioned,
(Contact Ann Arbor #3775)
Not Reconditioned 125 Ton SOUTH BEND Back Geared Press (1991)
6" Stroke, 16" Sh.Ht., 42" x 27" Bed, 40 SPM,
(Contact Nashville #4089)
Not Reconditioned A video of this press can be viewed on this web site. 150 Ton MINSTER Back Geared Press (1966)
12" Stroke, 26" Shut Height, 50" X 30" Bed, 40 SPM,
(Contact Ann Arbor #3132)
Not Reconditioned 150 Ton MINSTER Back Geared Press
6" Stroke, approx. 28" Sh.Ht., 50" x 30" Bed, 40 SPM, updated "Wintress" Solid State Controls,
(Contact Ann Arbor #4157)
Reconditioned A video of this press can be viewed on this web site. 150 Ton NIAGARA #E-150 (1980)
6" Stroke, 22½" Shut Height, 50" x 30" Bed, 32 SPM, with Light Curtains & Cushions,
(Contact Ann Arbor #3521)
Not Reconditioned 200 Ton NO. G1-200 GAP TYPE PRESS with CUSHION (1970)
8" Stroke, 24" Sh.Ht., 58" x 34" Bed, 48 SPM, with Air Cushion and Wintress "Smartpac" Controls,
(Contact Ann Arbor #4101)
Not Reconditioned 200 Ton NIAGARA #E-200 (1970)
8" Stroke, 24" Sh.Ht., 58" x 34" Bed, 40 SPM, with Air Cushion in Bed, Floor Standing,
(Contact Ann Arbor #3985)
Reconditioned 250 Ton MINSTER #G1-250 (1961)
4" Stroke, 20" Shut Height, 49" x 26" Bed, 60 SPM, Reconditioned, Excellent!
(Contact Nashville #3730)

O.B.I. FLYWHEEL TYPE PRESSES
Click on an individual press name to view its full listing plus photos and video (if available)

Reconditioned 22 Ton BLISS #C-22 Flywheel Type Press (1996)
3" Stroke, 9" Sh.Ht., 23½" x 14" Bed, approx. 150 SPM with Vari-Speed, Brake Monitor, Recirculating Lubrication System,
(Contact Ann Arbor #4075)
Not Reconditioned 22 Ton NIAGARA #M-22-A
2½" Stroke, 8½" Sh.Ht., 20" x 12" Bed, 150-300 SPM, Air Clutch, Very Good,
(Contact Ann Arbor #3802)
Not Reconditioned 24 Ton WALSH OBI Flywheel Type Press, #24 (1966)
2" Stroke, 8" Sh.Ht., 24" x 12" Bed, 100-300 SPM,
(Contact Nashville #4043)

Not Reconditioned 24 Ton WALSH OBI Flywheel Type Press, #24 (1968)
2" Stroke, 7" Sh.Ht., 24" x 12" Bed, 60-120 SPM, 2 in Stock
(Contact Nashville #4051)

Not Reconditioned 25 Ton HEIM #3-OBI-F
3" Stroke, 10" Sh.Ht., 24" x 15½" Bed, approx. 130 SPM, 16" Between Uprights, Complete,
(Contact Ann Arbor #3943)
Reconditioned 28 Ton WALSH OBI Flywheel Type Press, #28X (1966)
3" Str, 9" Sh.Ht., 24" x 14" Bed, 60-120 SPM, w/3½" Single Roll Feed, 2 in Stock, Reconditioned, Excellent,
(Contact Nashville #4044)

Reconditioned 28 Ton WALSH OBI Flywheel Type Press, #28X (1980)
3" Str, 8" Sh.Ht., 24" x 20" Bed, 60-120 SPM, w/6" Single Roll Feed, 2 in Stock, Reconditioned, Excellent,
(Contact Nashville #4049)

Not Reconditioned 32 Ton MINSTER #B1-32 (1960)
1½" Stroke, 10" Shut Height, 24" x 15" Bed, 100-200 SPM,
(Contact Ann Arbor #3635)
Not Reconditioned 32 Ton MINSTER #B1-32 (1959)
½" Stroke, 10½" Shut Height, 22" x 15" Bed, 100-200 SPM, Nice! $14,500,
(Contact Nashville #3636)
Reconditioned A video of this press can be viewed on this web site. 32 Ton MINSTER #B1-32 High Speed Gap Type Press
2" Stroke, 9½" Sh.Ht., 24" x 15" Bed, 325 SPM, 5" Feed, "New" Connection Bushing, Lub Pump and Motor!,
(Contact Ann Arbor #3668)
Not Reconditioned 35 Ton BLISS #C-35 OBI Flywheel Press (1973)
3" Stroke, 11" Sh.Ht., 26" x 17" Bed, approx. 75-150 SPM, Complete,
(Contact Ann Arbor #4118)
Not Reconditioned 35 Ton BLISS OBI Flywheel Press #C-35 (1987)
3" Stroke, 10¾" Sh.Ht., 26" x 16" Bed, approx. 120 SPM ,
(Contact Nashville #4171)
Not Reconditioned 35 Ton BLISS OBI Flywheel Press #C-35 (1979)
4" Str, 14½" Sh.Ht., 26" x 16" Bed, 120 SPM,
(Contact Nashville #4174)
Not Reconditioned 40 Ton ROUSSELLE GAP Double Crank OBI-Flywheel Type Press, #4B48
1" Stroke, 12" Sh.Ht., 48" x 16" Bed, 105 SPM,
(Contact Ann Arbor #3870)
Not Reconditioned 45 Ton BLISS Flywheel Type Press, NO.C-45 - MECH. CLUTCH - BARGAIN! (1963)
6" Stroke, 17" Sh.Ht., 29" x 19" Bed, 90 SPM, with Mechanical Rolling Key Clutch, Under Power - Bargain!,
(Contact Ann Arbor #3937)
Not Reconditioned 45 Ton FEDERAL #45 (1969)
4" Stroke, 28" x 18" Bed, 10½" Shut Height, 120 SPM, Very Good,
(Contact Nashville #3838)
Not Reconditioned 45 Ton FEDERAL #45 (1975)
3" Stroke, 28" x 18" Bed, 11" Shut Height, 120 SPM, Excellent!
(Contact Nashville #3862)
Not Reconditioned 45 Ton L & J OBI Flywheel Type Press #45 (1977)
3" Str, 10½" Sh.Ht., 28" x 18" Bed, 100-300 SPM, w/6" Single Roll Feed, 2 in Stock,
(Contact Nashville #4047/8)
Reconditioned A video of this press can be viewed on this web site. 45 Ton MINSTER #5 (1968)
4" Stroke, 12¼" Shut Height, 28" x 18" Bed, 60-120 SPM, Reconditioned,
(Contact Nashville #3703)
Not Reconditioned 45 Ton MINSTER #5 (1959)
5" Stroke, 11½" Shut Height, 28" x 18" Bed, 60-120 SPM,
(Contact Nashville #3707)
Not Reconditioned 45 Ton MINSTER #5 (1963)
2" Stroke, 10¾" Shut Height, 28" X 18" Bed, 85-250 SPM,
(Contact Nashville #3830)
Not Reconditioned 45 Ton MINSTER Flywheel Type Press
3" Stroke, 12½" Sh.Ht., 28" x 18" Bed, approx. 100 SPM, with Motor and Controls,
(Contact Ann Arbor #4087)
Reconditioned 45 Ton MINSTER Flywheel Type Press (1975)
3" Stroke, 15¾" Shut Height, 28" x 18" Bed, 45-90 SPM, Reconditioned, Excellent!
(Contact Nashville #4123)
Not Reconditioned 45 Ton WALSH OBI Flywheel Type Press, #45X (1985)
3" Str, 11" Sh.Ht., 28" x 20" Bed, 100-300 SPM, w/6" Single Roll Feed, (2)
(Contact Nashville #4046)

Not Reconditioned 60 Ton BLISS "Deep Throat" Flywheel Type Press #21-1/2 B
Approx. 6" Str., 15" Sh.Ht., 35" x 34" Bed, approx. 90 SPM, *Large 18" Throat Distance, 23" Between Uprights, with "Link 501" Solid State Controls!
(Contact Ann Arbor #3970)
Reconditioned 60 Ton BLISS #21-1/2 OBI Press (1951)
4" Stroke, 16" Sh.Ht., 32" x 22" Bed, 100 SPM, Reconditioned,
(Contact Nashville #4038)
Not Reconditioned 60 Ton BLISS #C-60 OBI Press (1970)
2½" Stroke, 15" Sh.Ht., 32" x 18" Bed, 100 SPM, 17" x 11" Flanged Ram, updated Wintress "WPC" Solid State Control,
(Contact Ann Arbor #4113)
Not Reconditioned 60 Ton FEDERAL #60 (1980)
3" Stroke, 15" Shut Height, 32" x 20" Bed Area, 250 SPM, 21" Wide x 10" Flanged Ram,
(Contact Ann Arbor #3774)
Reconditioned A video of this press can be viewed on this web site. 60 Ton FEDERAL Flywheel Type Press #55 "Deep Throat" (1966)
10" Stroke, 21" Sh.Ht., 36" x 28" Bed, 100 SPM, with 15" Throat Depth, updated "Link 501" Solid State Controls, Reconditioned,
(Contact Nashville #3969)
Not Reconditioned 60 Ton MINSTER #6 (1966)
3" Stroke, 13" Shut Height, 32" x 21" Bed Area, 90 SPM,
(Contact Ann Arbor #3770)
Reconditioned 60 Ton MINSTER #6 (1968)
7" Stroke, 18" Sh. Ht., 32" x 21" Bed Area, 90-180 SPM with AC Variable Freq. Drive,
(Contact Ann Arbor #3773)
Reconditioned 60 Ton MINSTER OBI Flywheel Press (1968)
6" Stroke, 16" Shut Height, 32" x 21" Bed Area, 90 SPM, w/Motorized Ram Adjustment, 2 in stock, Reconditioned, Excellent!
(Contact Nashville #3882)
Reconditioned 60 Ton MINSTER OBI Flywheel Press #6 (1968)
6" Stroke, 16" Shut Height, 32" x 21" Bed Area, 90 SPM, 2 in stock, Reconditioned, Excellent!
(Contact Nashville #3883)
Not Reconditioned 60 Ton MINSTER "DIE-NAMIC" Flywheel Type Press #6D (1971)
4" Stroke, 16" Sh.Ht., 32" x 21" Bed, 90-180 SPM, Power Ram Adj., Recirculating Lubrication, 6"x.187" Sgl. Roll Feed, 2 in Stock!!
(Contact Ann Arbor #4143)
Reconditioned 60 Ton MINSTER "DIE-NAMIC" Flywheel Type Press #6D (1971)
4" Stroke, 16" Sh.Ht., 32" x 21" Bed, 90 SPM, *Rebuilt Clutch and Brake, Power Ram Adj., Recirculating Lubrication, 2 in Stock!!,
(Contact Ann Arbor #4158)
Not Reconditioned 60 Ton MINSTER #6 Flywheel Type Press
4" Stroke, 13" Sh.Ht., 32" x21" Bed, 90 SPM, with Recirculating Lubrication,
(Contact Ann Arbor #4144)
Reconditioned 60 Ton MINSTER #B1-60 High Speed Gap Press
2" Stroke, 11" Sh.Ht., 32" x 21" Bed, 150-300 SPM, with 8" Vamco Sgl. Roll Feed, Recirculating Lubrication System, new Bushings,
(Contact Ann Arbor #4145)
Not Reconditioned 60 Ton NIAGARA FLYWHEEL TYPE PRESS #M-60
6" Str, 18" Sh.Ht., 32" RL x 21" FB Bed, 90 SPM, with Motor and Controls,
(Contact Ann Arbor #3783)
Not Reconditioned 60 Ton ROUSSELLE GAP Double Crank OBI-Flywheel Type Press, #6B76
3" Stroke, 11½" Sh.Ht., 76" x 18" Bed, 110 SPM, 64" Between Uprights, equipped Allen Bradley "Micro Logic 1000" Controller, 2 in Stock!
(Contact Ann Arbor #3868)
Reconditioned A video of this press can be viewed on this web site. 75 Ton MINSTER #7 (1958)
4" Stroke, 36" x 24" Bed, 15½" Shut Height, 90-180 SPM, Equipped with Updated "Link" Controls & Light Curtains, Reconditioned, Excellent!
(Contact Ann Arbor #3103)
Reconditioned 75 Ton NIAGARA OBI Flywheel Press #ES-75 (1974)
8" Str., 21" Sh.Ht., 36" x 24" Bed, 45-90 SPM, Excellent, Reconditioned
(Contact Nashville #4082)
Reconditioned 80 Ton FEDERAL (1979)
10" Stroke, 18½" Shut Height, 36" x 28" Bed, 75 SPM, Reconditioned,
(Contact Ann Arbor #3264)
Reconditioned 80 Ton FEDERAL No. 7
4" Str, 13½" Sh.Ht., 36" x 28" Bed, 75 SPM, with Air Cushion in bed,
(Contact Ann Arbor #3677)
Reconditioned A video of this press can be viewed on this web site. 80 Ton L & J Flywheel Type Press (1978)
4" Str, 11" Sh.Ht., 36" x 26" Bed, 40-80 SPM, Wintress Brake Monitor, Reconditioned,
(Contact Nashville #3932)
Not Reconditioned 150 Ton BLISS No. C-150 Gap Type (1975)
3" Stroke, 24" Sh.Ht., 50" x30" Bed, 60-150 SPM Variable Speed, with Recirculating Lubrication System,
(Contact Ann Arbor #4062)

  Guarantee Payment Terms Conditions of Sale

TWO LOCATIONS TO SERVE YOU
Ann Arbor Headquarters
3761 E. Ellsworth Road
Ann Arbor, MI 48108
(734) 971-8860
Fax: (734) 971-9080
info@almamachinery.com		 Nashville Warehouse
841 Mayberry Springs Road
Columbia, TN 38401
(615) 369-7788
Fax: (615) 369-7789
ken@almamachinery.com