USED STRAIGHT SIDE PRESSES
 |
Look for the Alma Machinery RECONDITIONED blue ribbon!
Every used press with this blue ribbon has been professionally
reconditioned by our experienced staff!
|
DOUBLE CRANK PRESSES
SINGLE CRANK PRESSES
STRAIGHT SIDE DOUBLE CRANK PRESSES
Click on an individual press name to view its full listing plus photos and video (if available)
 |
75 Ton WARCO #72-2-96C (1955)
8" Stroke, 20" Shut Height, 96" x 26" Bed, 45 SPM, Air Clutch, 3 in Stock
(Contact Ann Arbor #3183)
|
 |
75 Ton WARCO #72-2-96C (1955)
8" Stroke, 20" Shut Height, 96" x 26" Bed, 45 SPM, Air Clutch, 3 in Stock
(Contact Ann Arbor #3185)
|
 |
75 Ton WARCO #72-2-96C (1955)
8" Stroke, 20" Shut Height, 96" x 26" Bed, 45 SPM, Air Clutch, 3 in Stock
(Contact Ann Arbor #3191)
|
 |
80 Ton ROUSSELLE #8SS-60
3" Str, 13" SH., 60" x 30" Bed, 50 SPM, 14" Windows, Reconditioned, Very Good
(Contact Nashville #3472)
|
 |
100 Ton BLISS #S2-100-72-30 (1966)
10" Stroke, 22½" Shut Height, 72" x 30" Bed, 45 SPM-Geared, 19" Windows, Bliss Air Clutch,
(Contact Ann Arbor #3187)
|
 |
100 Ton BLISS #S2-100-60-36 (1965)
8" Stroke, 20" Shut Ht., 60" x 36" Bed, 40-80 SPM-Geared, 19" Windows, *New Motor & Controls, Rebuilt Clutch,
(Contact Ann Arbor #3188)
|
 |
100 Ton CLEARING #S2-100-60-36
8" Stroke, 20" Shut Height, 60" x 36" Bed, 40-80 SPM, Air Clutch, Cushions,
(Contact Ann Arbor #3179)
|
 |
100 Ton MINSTER #S2-100-48-30 (1965)
5" Stroke, 21-1/2" Shut Height, 48" x 30" Bed, 45-90 SPM, Light Curtains, New Controls, Reconditioned, Excellent!
(Contact Nashville #3377)
|
 |
100 Ton MINSTER #S2-100-48-31 (1976)
5" Stroke, 16" Shut Height, 48" x 31" Bed, 0-160 SPM, Reconditioned, Excellent!
(Contact Nashville #3800)
|
 |
100 Ton NIAGARA #BP2-100-60-30 (1990)
6" Stroke, 23-1/2" Shut Height, 60" x 30" Bed, 60-120 SPM, Air Clutch,
(Contact Nashville #3561)
|
 |
100 Ton WARCO #100-2-120E (1960)
8" Stroke, 20" Shut Height, 120" x 28" Bed, 35 SPM, 19" Windows, Air Clutch,
(Contact Ann Arbor #3193)
|
 |
125 Ton NIAGARA #SC2-125-72-36 (1981)
6" Stroke, 23" Sh.Ht., 72"x36" Bed, 20-45 SPM, 20" Windows, "Updated OmniLink Controls", 2-Available
(Contact Ann Arbor #3388)
|
 |
125 Ton CLEARING-NIAGARA #SC2-125-72-36 (1980)
6" Stroke, 23" Sh.Ht., 72"x36" Bed, 20-45 SPM, 20" Windows, "Updated OmniLink Controls", 2-Available
(Contact Ann Arbor #3389)
|
 |
125 Ton WARCO #SC2-125-96x42 (1969)
10" Stroke, 22" Shut Height, 96" x 32" Bed, 35 SPM, Air Clutch, Floor Standing,
(Contact Ann Arbor #3186)
|
 |
130 Ton WARCO #130-2-96C
8" Stroke, 22" Shut Height, 96" x 32" Bed, 45 SPM, Air Clutch,
(Contact Ann Arbor #3184)
|
 |
150 Ton BLISS #S2-150-72x36 (1968)
5" Stroke, 32" Shut Height, 72" x 36" Bed, 30-60 SPM, Updated Wintriss Control Panel, Reconditioned, Excellent!
(Contact Nashville #3420)
|
 |
150 Ton BLISS #S2-150-60x30 (1966)
6" Stroke, 22-1/2" Shut Height, 60" x 30" Bed, 35 SPM, 19" WW,
(Contact Ann Arbor #3469)
|
 |
150 Ton BLISS Straight Side Double Crank Press #S2-150-72x36 (1966)
5" Stroke, 32" Shut Height, 72" x 36" Bed, 30-70 SPM, 19" Windows, New Controls, 2 in Stock!!
(Contact Nashville #3887)
|
 |
150 Ton BLISS Straight Side Double Crank Press #S2-150-72x36 (1966)
5" Stroke, 32" Shut Height, 72" x 36" Bed, 30-60 SPM, 19" Windows, with 12" Vamco Cam Belt Feed, 2 in Stock!!
(Contact Ann Arbor #3888)
|
 |
150 Ton BLISS Straight Side Double Crank Press #S2-150-72-36 (1978)
6" Str., 30" Sh.Ht., 72" x 36" Bed, 50-80 SPM, 20" Windows, Floor Standing,
(Contact Ann Arbor #3931)
|
 |
150 Ton MINSTER #P2-150-48 (1962)
6" Stroke, 22" Shut Height, 48" x 40" Bed, 50-100 SPM, Mostly Rebuilt, Excellent!
(Contact Nashville #3368)
|
 |
150 Ton MINSTER #P2-150-48 (1966)
6" Stroke, 22" Shut Height, 48" x 40" Bed, 50-100 SPM, 20" WW, Reconditioned, Excellent!
(Contact Ann Arbor #3369)
|
 |
150 Ton NIAGARA #PN-150-84-48 (1965)
6" Stroke, 27" Sh.Ht., 84"x48" Bed, 33 SPM, Equipped With Updated New Wintress SmartPac #WPC 2000 Controls,
(Contact Ann Arbor #3912)
|
 |
150 Ton ROUSSELLE #S2-150-72-42
6" Stroke, 27" Sh.Ht., 72" x 42" Bed, 30-60 SPM, 30" WW, Cushions
(Contact Ann Arbor #3782)
|
 |
150 Ton V & O "Partsmaster" #SS2-150-50 (1956)
5" Stroke, 14" Sh.Ht., 52" x 34" Bed, 65-130 SPM, Vamco Feed, Reconditioned, Very Good,
(Contact Ann Arbor #3231)
|
 |
160 Ton MINSTER #S2-160-72-42
6" Stroke, 22¼" Shut Height, 72" x 42" Bed, 41 SPM, 18" Windows, With 20" Feed,
(Contact Ann Arbor #3297)
|
 |
160 Ton MINSTER #S2-160-60-42
12" Stroke, 28" Shut Ht., 60" x 42" Bed, approx. 20-40 SPM, Windows, *With Updated "Omnilink 5000" Controls,
(Contact Ann Arbor #3781)
|
 |
200 Ton BLISS SC2-200-96-48 (1974)
8" Str., 30" Sh.Ht., 96" x 48" Bed, 35-70 SPM, 30" Windows, Floor Standing,
(Contact Ann Arbor #3930)
|
 |
200 Ton BLOW #SDG-200-96 (1980)
10" Str., 20" Sh.Ht., 96" x 36" Bed, 20-60 SPM, 19" Windows, with Air Cushions in Floor Standing Base,
(Contact Ann Arbor #3709)
|
 |
200 Ton BROWN & BOGGS #SC2-200-84-42 (1980)
6" Str, 40" Sh.Ht., 84" x 42" Bed, 30-60 SPM, 22" Windows, w/12" x .156 Double Roll Feed & S.C.,
(Contact Ann Arbor #3480)
|
 |
200 Ton BROWN & BOGGS #SC2-200-72-42 (1975)
6" Str, 21" Sh.Ht., 72" x 42" Bed, 30-60 SPM, Windows,
(Contact Ann Arbor #3639)
|
 |
200 Ton MINSTER #E2-200-48-42
6" Stroke, 23" Shut Height, 48" X 42" Bed, 50-100 SPM (Variable), 21" WW,
(Contact Ann Arbor #3398)
|
 |
200 Ton MINSTER #E2-200-54-42 (1974)
6" Stroke, 28" Shut Height, 54" X 42" Bed, 50-100 SPM (Variable), 21" WW,
(Contact Ann Arbor #3400)
|
 |
200 Ton MINSTER #E2-200-72-48 (1981) - With Cushions
10" Str., 27" Sh.Ht., 72" x 48" Bed, 0-90 SPM, 24" Windows, Reconditioned, Excellent!!
(Contact Nashville #3558)
|
 |
200 Ton MINSTER #P2-200-48 (1975)
3" Str., 22" Sh.Ht., 48" x 44" Bed, 45-90 SPM-Geared, 20" Windows, with Air Cushion,
(Contact Ann Arbor #3718)
|
 |
200 Ton MINSTER #E2-200-54-36 "HEVISTAMPER (1970)
6" Stroke, 26" Sh.Ht., 54" x 36" Bed, 0-80 SPM-Geared, 2 in Stock,
(Contact Ann Arbor #3871)
|
 |
200 Ton MINSTER #P2-200-54-36 (1977)
6" Stroke, 26" Sh.Ht., 54" x 36" Bed, 0-80 SPM-Geared, 2 in Stock,
(Contact Nashville #3873)
|
 |
200 Ton NIAGARA #SC2-200-60-36 (1982)
7" Stroke, 30" Shut Height, 60" x 30" Bed, 30-60 SPM, 25" WW, Reconditioned, Very Good,
(Contact Ann Arbor #3450)
|
 |
200 Ton NIAGARA #SC2-200-72-42 (1972)
6" Str., 20" Sh.Ht., 72" x 42" Bed, 40-80 SPM, w/12" Feed,
(Contact Ann Arbor #3727)
|
 |
200 Ton VERSON #S2-200-60-48T (1973)
6" Str., 33" Sh.Ht., 60" x 48" Bed, 40-80 SPM, 35" Windows, Floor Standing, With Cushions, 2 in Stock!!
(Contact Ann Arbor #3298)
|
 |
200 Ton WARCO #S2-200-120-34 (1963)
8" Stroke, 22" Shut Height, 120" x 34" Bed, 40-80 SPM, Air Clutch, w/12" Double Roll Feed,
(Contact Ann Arbor #3189)
|
 |
220 Ton NIAGARA #SE2-200-72-42UH (1991)
6" Str., 28" Sh.Ht., 72" x 42" Bed, 50-100 SPM, Reconditioned, Excellent!, 3 in stock,
(Contact Nashville #3744)
|
 |
220 Ton NIAGARA #SE2-200-72-42UH (1992)
6" Str., 25" Sh. Ht., 72" x 42" Bed, 50-100 SPM-Geared, 26" Windows, with 18"x.125" CWP Servo Feed, Hyd. Overloads, Reconditioned, 3 in Stock,
(Contact Ann Arbor #3692)
|
 |
220 Ton STAMTEC #S2-200 (1996)
6" Str., 22" Sh.Ht., 86" x 48" Bed, 60-120 SPM, 18" WW, Excellent!
(Contact Nashville #3801)
|
 |
220 Ton STAMTEC Gap Frame Double Crank Press (1999)
9.8" Str., 20" Sh.Ht. over Bolster, 94" x 33" Bed, 25-45 SPM, 73" Between Uprights, 2 in Stock!
(Contact Ann Arbor #3915)
|
 |
250 Ton BLISS S2-250-60-48 (1964)
6" Str., 24" Sh.Ht., 60" x 48" Bed, 20-60 SPM, 30" Windows, Updated grease lubrication system, Reconditioned, Ready to Run, Excellent!!
(Contact Nashville #3449)
|
 |
250 Ton MINSTER #S2-250-72-48 (1955)
14" Stroke, 27" Shut Height, 72" x 48" Bed, 15-30 SPM, 19" Windows, Updated Controls, Reconditioned, Excellent!
(Contact Nashville #3540)
|
 |
250 Ton MINSTER E2-250-72-42 "Hevistamper" (1970)
8" Stroke, 27" Shut Ht., 72" x 42" Bed, 30-60 SPM, 22" Windows,
(Contact Ann Arbor #3810)
|
 |
300 Ton BLISS #SC2-300-72-48 (1994)
8" Str, 24" Shut Ht., 72" x 48" Bed, 30-60 SPM, 31" Windows, New Controls, Mostly Rebuilt, Excellent!
(Contact Nashville #3258)
|
 |
300 Ton BLISS #HP2-300-72-42 (1981)
8" Str., 24" Shut Ht., 72" x 42" Bed, 50-100 SPM-Geared, 27" Windows, with 12" Servo Feed,
(Contact Ann Arbor #3615)
|
 |
300 Ton MCKAY-WARCO #SC2-600 (1981)
6" Str, approx. 36" Sh.Ht., 72" x 36" Bed, 30-60 SPM, 25" Windows, 18" x .190" Feed Line available,
(Contact Ann Arbor #3482)
|
 |
300 Ton NIAGARA BP2-300-60-48
8" Stroke, 42" Shut Height, 60" x 48" Bed, 30-60 SPM, with Updated "Triad" Controls, Reconditioned,
(Contact Ann Arbor #2369)
|
 |
300 Ton NIAGARA BP2-300-72 (1974)
12" Stroke, 31" Shut Height, 72" x 42" Bed, 40-70 SPM, 25" Windows,
(Contact Nashville #2690)
|
 |
400 Ton BLISS #S2-400-84-48 (1968)
12" Stroke, 30" Shut Height, 84" x 48" Bed, 14 SPM, 25" Windows, Cushions, Very Good,
(Contact Nashville #3541)
|
 |
400 Ton BROWN & BOGGS #SC2-400-96-48 (1980)
8" Str, 38" Sh.Ht., 96" x 48" Bed, 30-60 SPM, 30" Windows, Complete 18" Heavy Duty Servo Feed Line available,
(Contact Ann Arbor #3481)
|
 |
400 Ton MCKAY-WARCO #SC2-400-96-60 (Rebuilt 1994)
6" Stroke, 25" Shut Height, 96" x 60" Bed, 20-40 SPM, 34" Windows, updated "Triad" Controls with Light Curtains, Video available of press under power!
(Contact Ann Arbor #3293)
|
 |
400 Ton MINSTER HEAVISTAMPER E2-400-120-48 (1980)
8" Str., 38" Sh.Ht., 120" x 48" Bed, 0-90 SPM, 30" Windows, Hydraulic Overloads, with 24" Minster Servo Feeder, Reconditioned, Excellent!
(Contact Nashville #3719)
|
 |
400 Ton MINSTER HEAVISTAMPER E2-400-54-42 (1978)
4" Str, 26" Sh.Ht., 54" x 42" Bed, 50-100 SPM, 26" Windows,
(Contact Ann Arbor #3720)
|
 |
400 Ton MINSTER HEAVISTAMPER E2-400-54-42 (1980)
4" Str, 26" Sh.Ht., 54" x 42" Bed, 50-100 SPM, 26" Windows, equipped with 20" Rowe Servo Feed, Reconditioned, Excellent!
(Contact Nashville #3721)
|
 |
400 Ton VERSON #C2-400-54-48T (1956)
14" Stroke, 38 1/2" Shut Height, 54" x 48" Bed, 15-30 SPM Variable, 27" Windows, Updated Controls,
(Contact Ann Arbor #3641)
|
 |
500 Ton MINSTER "HeviStamper" No. E2-500-60-48 (1970)
6" Str., 27" Sh.Ht., 60" x 48" Bed, 40-100 SPM-Geared!, 30" Windows, New Controls, Reconditioned, Excellent!
(Contact Nashville #3650)
|
 |
500 Ton NIAGARA #SC2-500-72-48 (1973)
12" Str0ke, 32" Shut Heightt, 72" x 48" Bed, 10-30 SPM, 29" Windows, Floor Standing Base with Air Cushions,
(Contact Ann Arbor #3300)
|
 |
600 Ton DANLY #S2-600 (1972)
6" Stroke, 33-1/2" SH, 112" x 42" Bed, 40-80 SPM, 35" Windows, Eddy Current Drive, 2 in stock, Excellent
(Contact Nashville #2231)
|
 |
600 Ton DANLY #S2-600 (1972)
6" Stroke, 33½" SH, 108" x 42" Bed, 40-80 SPM, 35" Windows, Updated Controls, Eddy Current Drive, 2 in Stock, Excellent!
(Contact Nashville #2232)
|
 |
600 Ton MINSTER HeviStamper E2-600-48-36 (1965)
10" Str., 26" Sh.Ht., 48" x 36" Bed, 12-25 SPM, 25" Windows, 107" Between Uprights, Updated Controls, *with 18" x .190" Littell Servo Feed Line,
(Contact Ann Arbor #3716)
|
 |
600 Ton MINSTER "Hevistamper" E2-600-84-48 (1980)
8" Str., 24" Sh.Ht., 84" x 48" Bed, 0-80 SPM, 33" Windows, Air Cushions, Floor Standing,
With 18" x .187" Servo Feed Line-Complete, 2 in Stock,
(Contact Ann Arbor #3786)
|
 |
600 Ton WEAN-UNITED (Warco) No. SC2-600-96-48 (1981)
8" Str, approx. 38" Sh.Ht., 96" x 48" Bed, 30-60 SPM, 38" Windows, 18" x .180" Complete Feed Line available, Excellent!
(Contact Ann Arbor #3479)
|
STRAIGHT SIDE SINGLE CRANK PRESSES
Click on an individual press name to view its full listing plus photos and video (if available)
 |
175 Ton BLISS Straight Side Single Crank Press #S1-175
8" Stroke, 21½" Shut Height, 36" x 36" Bed & Ram, 33 SPM, 19" Windows,
(Contact Ann Arbor #3880)
|
 |
250 Ton BLISS S1-250 (1967)
8" Stroke, 21" Shut Height, 30" x 36" Bed, 45 SPM, 25" Windows,
(Contact Ann Arbor #3517)
|
 |
300 Ton MINSTER #S1-300-36 (1970)
4" Str., 18" Sh.Ht., 36" x 42" Bed, 0-85 SPM-Geared, with 18" Single Roll Feed, Reconditioned, Very Good,
(Contact Ann Arbor #3722)
|
 |
400 Ton MINSTER S1-400-36-48 (1972)
10" Str., 31" Sh.Ht., 36" x 48" Bed, 60 SPM,
(Contact Ann Arbor #3728)
|
 |
500 Ton BLISS #S1-500-42-48 (1970)
8" Stroke, 27" Shut Height, 42" x 48" Bed, 20-40 SPM Variable, 30" Windows, Updated Controls, Excellent!!
(Contact Ann Arbor #3642)
|
| TWO LOCATIONS TO SERVE YOU
|
Ann Arbor Headquarters
3761 E. Ellsworth Road
Ann Arbor, MI 48108
(734) 971-8860
Fax: (734) 971-9080
info@almamachinery.com |
Nashville Warehouse
841 Mayberry Springs Road
Columbia, TN 38401
(615) 369-7788
Fax: (615) 369-7789
ken@almamachinery.com
|
|
|
|