125 Ton Wabash 4-Post Molding (4-Openings) Used Press • 125 Ton Hydraulic Press

125 

125
Ton
38″
Bed R-L
12″
Stroke

Wabash PC125-2424-8TM 12″ Stroke, 42″ Daylight (Currently 3″ Between 5 Platens), (5) 24″ x 24″ 600 Degree Platens,

Machine #5338
(Jackson, MI Falahee Building)

Machine Specifications

Used 125 Ton Press for Sale • Hydraulic Press

Model PC125-2424-8TM (1985)
Serial 7695
Condition: Very Good
Contact: Jackson, MI Falahee Building #5338

capacity 125 TONS
MAX. STROKE 0-12″ UPACTING
MAX. DAYLIGHT TO BED 42″ TOTAL (3″ each between 4-openings))
OVERALL BED & RAM AREA 38″ X 25″ (RL X FB)
DISTANCE BETWEEN POSTS 29″ X 15″ (RL X FB)
USABLE BED & RAM AREAS 29″ X 25″
ELECTRIC HEATED PLATENS 24″ X 24″ (RL X FB) X 2.25″ THICK (HEATED UP TO 600 DEG. F • WATER COOLED PLATENS)
RAM SPEEDS 55″/MIN CLOSING / 3″/MIN PRESSING / 65″/MIN RETURN
POST SIZE 3″ DIA.
CYLINDER SIZE TWO CYLINDERS 8″ / 3.5″ @ 2486 PSI
HYDRAULICS 2 HYDRAULIC PUMPS
ELECTRICS / CONTROLS PUSHBUTTON OPERATION W/ STROKE & PRESSURE CONTROL
MOTOR 5HP MOTOR – 230/460V 3-60 – 1740 RPM
FLOOR TO TOP OF MOVING PLATEN 35″
OVERALL DIMENSIONS 65″ X 56″ (RL X FB) X 90″ HIGH 5’5″ X 4’8″ (RL X FB) X 7’6″ HIGH
APPROX. WEIGHT 11,500 LBS.
Equipped With DUAL PALM BUTTONS SELECTOR SWITCH FOR MANUAL OR SEMI-AUTO OPERATION CYCLE TIMERS FOR LOW PRESSURE, HIGH PRESSURE, WATER, AIR, AIR PURGE 8 DIGITAL TEMPERATURE INDICATING CONTROLLERS LOW & HIGH PRESSURE GAUGES
Note
Location This used Hydraulic Press is located in our Jackson, MI Falahee Building

Additional information

Stroke

BedRL