400 Ton Wabash Press • 49″ Wide 16″ Stroke Used Compression Molding Press

400 

400
Ton
49″
Bed R-L
16″
Stroke

Wabash DA4002H-30-OLPX 400 Ton Wabash – 16″ Str, 26″ DL, (3) 30″ x 30″ Heated Platens (2 Openings) – 500 DEG

Machine #5051
(Jackson, MI Cooper Building)

Machine Specifications

Used 400 Ton Press for Sale • Compression Molding Press

Model: DA4002H-30-OLPX
Year: 2006
Condition: Like New!
Contact: Jackson, MI Cooper Building #5051

capacity 400 TONS @ 2724 psi
max. stroke 16″ down acting
max. daylight to bed approx. 8″ between each platen approx. 26″ without platens
heated platen size 30″ X 30″ with 2 openings 1675/1500/1675 watts each – 240 volt
overall bed & ram area 49″ RL X 33″ FB – (22″ floor to bed) 35.5″ BETWEEN POSTS (19″ FB)
USABLE BED AREA 35.5″ X 33″ (RL X FB) OVERALL 30″ X 30″ HEATED PLATENS
speeds: 60 IPM CLOSING – 3 IPM PRESSING – 80 IPM RETURN
post size 4.5″
cylinder sizes main – 18″ dia. bore, 2 – jack cylinders – 5″ bore
hydraulics 50 hp, 230/460-3-60 motor with rexroth piston pump no. pkc92n00,
no. aa10vs071dfr/31r, 34 gpm 95 gal tank floor mt’d & 50 gal crown mt’d
electrics CURRENTLY WIRED FOR 460 VOLTS, 165 AMPS 500 DEG. F MAX TEMP. FOR PLATENS
appRox. dimensions 10′ 3″ high w/hyd. unit, 9′ 6″ rl, 7′ 6″ fb press only – 8’9″ high, 6′ rl, 5′ fb
approx. weight press – *24,500 lbs. hyd. unit – *5,250 lbs.
Equipped With FLOOR STANDING BASE 4-POST – DOWN ACTING TYPE 2-OPENINGS WITH “HEATED PLATENS” PLATENS MAX TEMPERATURE OF 500 F
Note ***this press is in “like New” condition with very little use!
Location This used 400 Ton Wabash Press is located in our Jackson, MI Cooper Building

Additional information

Stroke

BedRL

Video