80 Ton Wabash 4-Post Used Press • 80 Ton Hydraulic Press

80 

80
Ton
36″
Bed R-L
8″
Stroke

Wabash PCV80-1818-3CTMX 8″ STR, 18″ X 18″ Heated & Cooled Platens, 36″ X 19″ O.A. Bed & Ram, with Vacuum Chamber

Machine #4727
(Jackson, MI Falahee Building)

Machine Specifications

Used 80 Ton Press for Sale • Hydraulic Press

Model PCV80-1818-3CTMX (1989)
Serial 8367
Condition: Very Good
Contact: Jackson, MI Falahee Building #4727

capacity 80 ton @ 2100 PSI
max. stroke 8″ – Up acting ram
daylight between platens – 2 OPENINGS 4″ opening between each platen
overall bed & ram area 36″ rl x 19″ fb (42″ floor to top of ram)
distance between posts (3″ dia. posts) 27″ rl x 9-1/2″ fb
usable bed & ram area 27″ rl x 19″ fb
heated & water cooled platen size 3 – 18″ x 18″ Platens
top & bottom platens 8 heaters at 230 volts, 940 watts each 7520 watts – total (32 – 750 deg. f)
middle platen 16 heaters at 230 volts, 625 each 10,000 watts total (32 – 750 deg. f)
VACUUM CHAMBER 3 HP BECKER VACUUM PUMP (RATED AT 29.9″ HG) USED FOR OPTIONAL VACUUM LAMINATING
CYLINDER SIZE 2 – 7″ DIA BORE, 3″ DIA ROD
HYRAULICS 5 HP, 230/460-3-60 MOTOR WITH RACINE COMBINATION VANE & PISTON PUMP NO. PSV-PCO-25ERM
20 GPM VARIABLE VANE + 7-PISTON RADIAL(0.79 GPM) 45 GALLON TANK – FLOOR MOUNTED
ELECTRICS CONTROL PANEL COMPLETE WTIH AB SCL-100 PLC 7520 / 10000 WATTS EACH PLATEN
OVERALL DIMENSIONS 6′ HIGH, 8′ 6″ RL, 6′ 6″ FB OVERALL
APPROX. WEIGHT 11,500 LBS.
Equipped With *press equipped with VACUUM CHAMER SO CAN ALSO BE USED AS A VACUUM LAMINATION PRESS B-1002-C6-T FAUVER CO. HEAT EXCHANGER
Note
Location This used Hydraulic Press is located in our Jackson, MI Falahee Building

Additional information

Stroke

BedRL