11,000 LB. x 24″ x .180″ Orii Servo Feed Line • Orii LCC06HP2ALMAJAX-YHD

12 

11000
Coil Capacity
24″
Coil Width
0.18″
Material Thickness

Was $19,500 • Straightener $1,000 | Reel $6,500
Orii LCC06HP2ALMAJAX-YHD
24.4″ x .020″-.180″ Capacity Servo Feeder/Strn’r, 630 IPM, 11,000 LB x 24.4″ Reel, 59″ OD, 17.3″ – 24″ ID w/Hyd. Expansion, Coil Car, As Is $35,000

Machine #4964
(Jackson, MI Falahee Building)

Machine Specifications

Used Coil Reel and Straightener for Sale

Model LCC06HP2ALMAJAX-YHD (1995) 143000451
Condition: As-Is
Contact: Jackson, MI Falahee Building #4964

servo feed and 7-roll straightener capacity
feed capacities 24.4″ wide x .020″-.180″ (620mm x 0.5 – 4.5 mm)
line speed 630 ipm (16m/min.) left – right
max. feed length 19.6″ (500 mm)
feed line height 55.3″ (1405 mm)
feed roll size 5.2″ dia. x 24.4″ wide (132 mm dia. x 620 mm wide)
electrics 460 volt, 5.5 kw ac servo motor
straightener roll size 24.4″ wide x 2.6″ dia. (7 roll type, 4/3)
coil reel capacities *with traversing base 11,000 lb x 24.4″ (5,000 kg x 620 mm)
max. coil o.d. 59″ o.d. (1500 mm)
coil i.d. range 20″ – 24″ (508-610 mm) ***w/hydraulic expansion 17.3″ – 20.4″ (440-520 mm)
Coil car capacity 11,000 lbs., with 13.7″ (350 mm) max. lift height
electrics with 8 hp (6 kw) motor and controls
“as is price” $35,000
Equipped With ***note: with coil hold down arm threading table photo sensor loop control
Note STRAIGHTENER IS WORKING UNDER POWER, FEEDER NOT CURRENTLY WORKING (SEE VIDEO)
Location Machine is located in Jackson, MI Falahee Building

Additional information

Width

Video