Description
Used Ironworker for Sale
Model: 1/2
Condition: As-Is Under Power
Location: Jackson, MI Falahee Building
Year:
Machine #: 5470
Buy Now: $9,500
| BAR CUTTER TONNAGE | 106 TONS AT RAM | BAR CUTTER CAPACITY (ANGLES) | 4 X 4 X 1/2" ANGLES SQ., 3 X 3 X 5/16" ANGLES 45 % MITRE | -- | 3 X 3 X 3/8" TEES SQ., 1 5/8" ROUNDS, 1-1/2" SQUARES | PUNCH CAPACITY | 1" X 5/8", OR 13/16" X 3/4" | SHEAR CAPACITY (PLATE & FLAT) | 1/2" PLATES, 6" X 5/8" FLATS | BUILT-IN 90 DEG NOTCHER | 2.75" DEPTH OF CUT, 3 X 5/16 ANGLES | BUILT-IN NOTCHER ON PUNCH END | 3 X 3 X 5/16" ANGLES, FLANGES OF 4" TO 6" BEAMS & 4" TO 5" CHANNELS | BUILT-IN NOTCHER ON SHEAR END | 3 X 3 X 3/8" ANGLES, 3 X 3 X 3/8" TEES, 5/16" PLATES, FLANGES OF 3" TO 6" BEAMS AND CHANNELS | BUILT-IN COPER ON SHEAR END | 3 X 3 X 3/8" ANGLES, 3 X 3 X 3/8" TESS, 3/8" PLATES, FLANGES OF 3" TO 6" BEAMS AND CHANNELS | MOTOR / ELECTRICAL | 3 HP / 440 VOLT | RPM | 300 FLYWHEEL SPEED | BAR CUTTER CAPACITY (SOLID) | 1-5/8" ROUNDS, 1-1/2" SQUARES, 3" X 3" X 3/8" TEES | NOTCHER CAPACITIES | BUILT-IN ON PUNCH & SHEAR ENDS FOR ANGLES, TEES, PLATES, BEAMS, AND CHANNELS | COPER CAPACITY | BUILT-IN ON SHEAR END FOR ANGLES, TEES, PLATES, BEAMS, AND CHANNELS | FLYWHEEL SPEED | 300 RPM | Note | HEAVY-DUTY MECHANICAL UNIVERSAL IRONWORKER MANUFACTURED BY BUFFALO FORGE CO. ALL CUTTING AND PUNCHING CAPACITIES ARE BASED ON MILD STEEL (60,000# T.S.) | Equipped With | PUNCH STATION, SHEAR STATION, BAR CUTTER, BUILT-IN NOTCHER, BUILT-IN COPER, MECHANICAL FOOT PEDAL CONTROL, AND AN ASSORTMENT OF PUNCHES / DIES / TOOLING BLOCK RESTS AS PICTURED |
|---|---|
| Location | This Used Fabrication Machine is located in our Jackson, MI Falahee Building |
