-
10,000 Lbs. x 36″ American w/Coil Car • American 1000
2,252 Request a Quote10000
Coil Capacity36″
Coil Width60″
Coil O.D.Was $9,500 • Now $2,500
American 1000 36″ Wide, 60″ OD, 20-30″ I.D. w/Hyd. Exp.Machine #5506
(Jackson, MI Falahee Building) -
600 Ton Wean-United (Warco) Used Press • 600 Ton Straight Side Double Crank Press
600 Request a Quote600
Ton96″
Bed R-L8″
StrokeWas $325,000 • Now $269,000
Warco SC2-600-96-48 8″ Stroke, 38″ Shut Height, 96″ x 48″ Bed, 30-60 SPM, 38″ Windows 1981Machine #3479
(Jackson, MI Falahee Building) -
400 Ton Meccanica Beretta Used Press • 400 Ton Hydraulic Press
400 Request a Quote400
Ton90″
Bed R-L13.8″
StrokeWas $225,000 • Now $137,500
Meccanica Beretta 4-Post Type 13.8″ Str, 34″ DL, 90″ x 77″ Overall Bed, 67″ x 77″ Usable Bed, With Safety Latches, Floor StandingMachine #4418
(Jackson, MI Falahee Building) -
250 Ton Cammerzell Slab Side 4-Post Guides Used Press • 250 Ton Hydraulic Press
250 Request a Quote250
Ton29.5″
Bed R-L5″
StrokeWas $29,500 • Now $2,500
Cammerzell C-250 5″ Stroke, 18″ Daylight, 29½” x 23″ Bed, with Omron “Sysmac” #C200H Processor, Safety Blocks for Ram, Equipped with Ejector Ram in BaseMachine #4058
(Jackson, MI Falahee Building) -
Perfecto Single Roll Cam Driven Feed • Perfecto 66-12
12 Request a Quote999
Stroke12″
Stock Width1″
Material ThicknessWas $3,500 • Now $1,500
Perfecto 66-12Machine #5550
(Jackson, MI Falahee Building) -
12″ W X .078″ CWP Servomatic Servo • Dickerman SM 12
12 Request a Quote999
Stroke12″
Coil Width0.078″
Material ThicknessWas $2,500 • Now $750
Dickerman SM 12 12″ W X .078″ TH X 999.999″ MAX FEED STROKEMachine #5499
(Jackson, MI Falahee Building) -
200 Wallace Engineering Compression Molding Used Press • 200 Ton Hydraulic Press
200 Request a Quote200
Ton60″
Bed R-L52″
StrokeWas $174,500 • Now $39,500
Wallace Gib Guided 48″ Stroke, 72″ Daylight, 60″ x 48″ Bed & Ram, with Updated Allen Bradley ControllerMachine #3582
(Jackson, MI Falahee Building) -
200 Ton Ducane / Wayne Used Press • 200 Ton Hydraulic Press
200 Request a Quote200
Ton60″
Bed R-L8″
StrokeWas $65,000 • Now $14,500
Ducane Gib-Guided 8″ Stroke, 18″ Daylight, 60″ x 47″ Bed, 2 in StockMachine #4107
(Jackson, MI Falahee Building) -
150 Ton Summit 4-Post Used Press • 150 Ton Hydraulic Press
150 Request a Quote150
Ton135″
Bed R-L42″
StrokeWas $185,000 • Now $95,500
Summit Compression Molding 42″ Str, 75″ DL, 120″ x 60″ Usable Bed, Rebuilt Hydraulic Unit, Updated Cylinders, Equipped with New 120″ x 60″ Heated Platens (400 deg F)Machine #4740
(Jackson, MI Falahee Building) -
150 Ton Niagara Used Press • 150 Ton OBI Back Geared Type Press
150 Request a Quote150
Ton51.5″
Bed R-L10″
StrokeWas $64,500 • Now $29,500
Niagara E-150-S 10″ Stroke, 33″ Sh.Ht., 51.5″ x 30″ Bed, 32 SPM, Complete ControlsMachine #4404
(Jackson, MI Falahee Building) -
150 Ton Hamilton 4-Post Compression Molding Used Press • 150 Ton Hydraulic Press
150 Request a Quote150
Ton120″
Bed R-L61″
StrokeWas $69,500 • Now $29,500
Hamilton Compression Molding 61″ Upactiing Stroke, 84″ Daylight, 120″ x 66″ Usable Bed, with Allen Bradley SLC 5/01 PLCMachine #4244
(Jackson, MI Falahee Building) -
125 Ton South Bend / Johnson OBI Used Press • 125 Ton OBI Back Geared Type Press
125 Request a Quote125
Ton42″
Bed R-L6″
StrokeWas $49,500 • Now $39,500
South Bend Johnson 125-B.G.-A.C. 6″ Str, 18″ Sh, 42″ x 27″ Bed, 40 SPM, CushionMachine #4657
(Jackson, MI Cooper Building) -
Labelmill Automatic Label Applicator • Labelmill LM1500 Label Machine
115 Request a Quote115
Voltage7.5″
Roll Width12″
O.D.Was $4,500 • OPEN TO OFFERS
Labelmill LM1500Machine #5545
(Jackson, MI Falahee Building) -
113 Ton Minster Used Press • 113 Ton Straight Side Double Crank Press
113 Request a Quote113
Ton48″
Bed R-L8″
StrokeWas $49,500 • Now $7,500
Minster 50-5-1/2-48 48X35 BEDMachine #5042
(Columbia, TN Warehouse) -
110 Ton Danly Used Press • 110 Ton OBI Flywheel Type Press
110 Request a Quote110
Ton42″
Bed R-L6″
StrokeWas $59,500 • Now $39,500
Danly 110 6″ Stroke, 3.5″ RAM ADJ, 18″ Shut Height, 42″ x 27″ Bed Area, 90 SPM, Air Clutch & BrakeMachine #4787
(Jackson, MI Cooper Building) -
110 Ton Bliss Used Press • 110 Ton OBI Back Geared Type Press
110 Request a Quote110
Ton48″
Bed R-L6″
StrokeWas $64,500 • Now $25,000
Bliss C-110 6″ Str, 17″ Sh.Ht., 48″ x 28″ Bed, 48 SPM, 42″ x 27″ Flanged RamMachine #4194
(Jackson, MI Falahee Building) -
100 Ton Oak – Parts Used Press • 100 Ton High Speed Production Press
100 Request a Quote100
Ton64″
Bed R-L1.62″
StrokeWas $29,500 • Now $3,500
Oak 48-HSC-100 1-5/8″ Stroke, 16″ Sh.Ht., 48″ x 30″ Bed, 80-500 SPM, selling “As Is” without Controls and has Bent Crank. $5,000Machine #2302
(Jackson, MI Falahee Building) -
100 Ton Hamilton Gib-Guided Compression Molding Used Press • 100 Ton Hydraulic Press
100 Request a Quote100
Ton127″
Bed R-L30″
StrokeWas $94,500 • Now $74,500
Hamilton 100AP082 30″ Stroke, 127″ x 74″ Bed, 48″ Daylight, 76″ Windows, With 60 HP Motor and Vickers Pumps, Allen Bradley PLC’s, Safety Latches, With Heater ControlsMachine #4269
(Jackson, MI Falahee Building) -
100 Ton Federal Used Press • 100 Ton OBI Flywheel Type Press
100 Request a Quote100
Ton36″
Bed R-L1″
StrokeWas $19,500 • Now $4,500
Federal 8 1″ Str, 15.5″ SH, 36″ x 28″ Bed, 40 SPM, 2.5″ Ram Adjust, AB Controls, Nice Trabon Lube SystemMachine #4701
(Jackson, MI Cooper Building) -
90 Ton Federal Used Press • 90 Ton Flywheel Gap Frame Press
90 Request a Quote90
Ton40″
Bed R-L4″
StrokeWas $22,500 • Now $8,500
Federal Approx 4″ Stroke, 40″ RL x 28″ FB Bed, 90 SPM,Machine #4647
(Jackson, MI Cooper Building) -
90 Ton Clearing Used Press • 90 Ton OBI Back Geared Type Press
90 Request a Quote90
Ton43″
Bed R-L6″
StrokeWas $24,500 • Now $16,500
U.S.I. Clearing 90 6″ Str, 17″ Sh., 43″ x 26″ Bed, 40 SPMMachine #4658
(Jackson, MI Cooper Building) -
60 Ton Rousselle Used Press • 60 Ton OBI Flywheel Type Press
60 Request a Quote60
Ton30″
Bed R-L4″
StrokeWas $19,500 • Now $14,500
Rousselle 6A 4″ Stroke, 18.5″ SH, 30″x18″ Bed, 110 SPM, LINK CtrlsMachine #4584
(Jackson, MI Cooper Building) -
60 Ton Precision Flex-O-Press Used Press • 60 Ton High Speed Production Press
60 Request a Quote60
Ton30″
Bed R-L2″
StrokeWas $24,500 • Now $3,500
Flex-O-Press SA60 30X24 2″ Str., 24″ Sh.Ht., 30″ x 24″ Bed, 90-360 SPM, with “Updated” Bliss Advantage 3 Controls & Light Curtains, Very Good!Machine #3553
(Jackson, MI Falahee Building) -
60 Ton Oak Part Per Stroke Fin Used Press • 60 Ton High Speed Production Press
60 Request a Quote60
Ton48″
Bed R-L1.5″
StrokeWas $74,500 • Now $59,500
Oak FP-2-48 1-1/2″ Str, 48″ x 34″ Bed, 165-330 SPMMachine #4395
(Jackson, MI Falahee Building) -
60 Ton Niagara Used Press • 60 Ton OBI Flywheel Type Press
60 Request a Quote60
Ton32″
Bed R-L6″
StrokeWas $14,500 • Now $4,500
Niagara M-60 6″ Str, 18″ Sh.Ht., 32″ RL x 21″ FB Bed, 90 SPM, with Motor and ControlsMachine #3783
(Jackson, MI Cooper Building) -
60 Ton Minster Used Press • 60 Ton OBI Flywheel Type Press
60 Request a Quote60
Ton32″
Bed R-L3″
StrokeWas $21,500 • Now $7,500
Minster 6 Approx. 3″ Str, 32″ x 21″ Bed, 90 SPM, “Update Milne Solid State Controls”Machine #4819
(Jackson, MI Cooper Building) -
60 Ton Minster Gap Frame Used Press • 60 Ton High Speed Production Press
60 Request a Quote60
Ton32″
Bed R-L0.75″
StrokeWas $29,500 • Now $6,500
Minster B1-60 3/4″ Stroke, 13″ Shut Height, 32″ x 18″ Bed, 0-600 SPM, Air Clutch , Missing ControlsMachine #4169
(Jackson, MI Cooper Building) -
50 Ton Pacific Pressformer Gap Frame Used Press • 50 Ton Hydraulic Press
50 Request a Quote50
Ton36″
Bed R-L12″
StrokeWas $27,500 • Now $14,500
Pacific 50PF Gap Frame 12″ Stroke, 18″ Daylight, 36″ x 18″, 180/60/60 IPM, Bed, 1972Machine #4287
(Jackson, MI Cooper Building) -
50 Ton Miller Moorehead 4-Post Used Press • 50 Ton Hydraulic Press
50 Request a Quote50
Ton70″
Bed R-L12″
StrokeWas $14,500 • Now $8,850
Miller Moorehead 12″ Stroke, 23″ Daylight, 71″ x 27″ Overall Bed, 60 HP Motor with Vickers PumpMachine #3957
(Jackson, MI Cooper Building) -
50 Ton Denison 4-Post Used Press • 50 Ton Hydraulic Press
50 Request a Quote50
Ton46.5″
Bed R-L26.5″
StrokeWas $39,500 • Now $29,500
Denison Multipress DCT-050-2-S1 37″ Daylight, 36″ x 38″ Usable Bed, Hydraulic Compression Molding Type Press with Relay Logic Controls & TimersMachine #3942
(Jackson, MI Cooper Building) -
50 Ton Air-Hydraulic Gap Used Press • 50 Ton Hydraulic Press
50 Request a Quote50
Ton27″
Bed R-L12″
StrokeWas $14,500 • Now $4,500
Air-Hydraulics HP545-50 12″ Str, 18″ DL, 27″ x 20″ Bed, with AB 5/04 PLC Controls, 2 in Stock $7,500 each. Press parts or a cheap press option.Machine #4317
(Jackson, MI Cooper Building) -
50 Ton Air Hydraulic C-Frame Used Press • 50 Ton Hydraulic Press
50 Request a Quote50
Ton27″
Bed R-L12″
StrokeWas $19,500 • Now $4,500
Air-Hydraulics HP545-50 Press is sold As-Is and a great option for those looking for used press parts for sale.Machine #4318
(Jackson, MI Cooper Building) -
45 Ton Bliss Used Press • 45 Ton OBI Flywheel Type Press
45 Request a Quote45
Ton29.5″
Bed R-L3″
StrokeWas $3,500 • Now $995
Bliss C-45 3″ Stroke, 12″ Shut Ht., 29″ x 18″ Bed, 100 SPM, Complete – Note: For Sale “As Is” for now.Machine #4306
(Jackson, MI Falahee Building) -
45 Ton Bliss OBI Used Press • 45 Ton High Speed Production Press
45 Request a Quote45
Ton29.5″
Bed R-L2″
StrokeWas $22,500 • Now $12,500
Bliss CH-45 2″ STR, 12.875″ SH, 29.5X19.5 BED, 250 SPM, 3″ ADJMachine #5111
(Columbia, TN Warehouse) -
45 Ton Bliss Mechanical Clutch Used Press • 45 Ton Flywheel Gap Type Press
45 Request a Quote45
Ton30″
Bed R-L3″
StrokeWas $7,500 • Now $4,500
Bliss C-45 3″ STR, 12.25″ Shut Height, 30″ X 18″ Bed Area, 100 Strokes per Minute, 3″ ADJ, Mechanical ClutchMachine #4937
(Columbia, TN Warehouse) -
45 Ton Bliss Gap Frame Used Press • 45 Ton High Speed Production Press
45 Request a Quote45
Ton29.5″
Bed R-L2.25″
StrokeWas $22,500 • Now $12,500
Bliss CH-45 2.25″ STR, 12.875″ SH, 29.5X19.5 BED, 250 SPM, 3″ ADJMachine #5115
(Columbia, TN Warehouse) -
35 Ton V & O Used Press • 35 Ton High Speed Production Press
35 Request a Quote35
Ton29″
Bed R-L2″
StrokeWas $24,500 • Now $7,500
V and O 35ST 2″ Str, 29″ x 16″ Bed, 100-300 SPM, Feed, 5 in StockMachine #4772
(Jackson, MI Cooper Building) -
35 Ton V & O Gap Frame Used Press • 35 Ton High Speed Production Press
35 Request a Quote35
Ton29″
Bed R-L2″
StrokeWas $24,500 • Now $7,500
V and O 35ST 2″ Str, 24″ Bed, 100-300 SPM, with Feed
*** 5 Presses in Stock!!!! (4722, 4771, 4773, 4776, 4777)Machine #4771
(Jackson, MI Cooper Building) -
35 Ton Bliss Used Press • 35 Ton Flywheel Gap Frame Press
35 Request a Quote35
Ton26.5″
Bed R-L1.1″
StrokeWas $14,500 • Now $4,500
Bliss CH-35 1″ Stroke,10.5″ SH, 26″x17″ Bed,175-350 SPM, 6″ SR Feed, 3 in StockMachine #4292
(Jackson, MI Cooper Building) -
32 Ton Minster Used Press • 32 Ton OBI Flywheel Type Press
32 Request a Quote32
Ton22″
Bed R-L1″
StrokeWas $14,500 • Now $6,500
Minster 4 1″ Str, 22″ x 14″ Bed, Updated Controls & Brake Monitor
Approx. 200 SPMMachine #4820
(Jackson, MI Cooper Building) -
32 Ton Minster Used Press • 32 Ton Flywheel Gap Frame Press
32 Request a Quote32
Ton24″
Bed R-L3″
StrokeWas $32,500 • Now $14,500
Minster 4 3″ STR, 10.5″ SH, 24X15 BED, 150 SPM, 2.25″ ADJMachine #5504
(Columbia, TN Warehouse) -
32 Ton Minster Used Press • 32 Ton Flywheel Gap Frame Press
32 Request a Quote32
Ton24″
Bed R-L4″
StrokeWas $32,500 • Now $14,500
Minster 4 4″ STR, 13″ SH, 24X15 BED, 130 SPM, 2.25″ ADJMachine #5505
(Columbia, TN Warehouse) -
32 Ton Minster Gap Frame High Speed Used Press • 32 Ton High Speed Production Press
32 Request a Quote32
Ton24″
Bed R-L1″
StrokeWas $24,500 • Now $7,500
Minster B1-32 1″ Str, 24″ x 14″ Bed, 450-900 SPM Vari-Speed, With 4.25″ Wide Feed, As Is – $7,500Machine #4677
(Jackson, MI Cooper Building) -
30 Ton Teledyne Flexopress Used Press • 30 Ton High Speed Production Press
30 Request a Quote30
Ton20″
Bed R-L1.5″
StrokeWas $24,500 • Now $7,500
Teledyne HPC-30 1.5″ Stroke, 7.5″ Shut Height, 20X17,100-400, 6″ FeedMachine #4252
(Jackson, MI Falahee Building) -
30 Ton Schuler Leukart 4-Post Used Press • 30 Ton Hydraulic Press
30 Request a Quote30
Ton43″
Bed R-L18″
StrokeWas $29,500 • Now $9,500
Schuler 4C-30P 18″ max. Stroke, 30″ max. Daylight, 43″ x 25″ Bed & Ram, 34″ x 17″ Between Posts, equipped with Safety Latches on Ram, Motor and ControlsMachine #3441
(Jackson, MI Cooper Building) -
30 Ton Modern 4-Post Used Press • 30 Ton Hydraulic Press
30 Request a Quote30
Ton50″
Bed R-L18″
StrokeWas $21,500 • Now $6,750
Modern 18″ Str, 26″ DL, 32″x17″ BP, Safety Latches, Allen Bradley SLC 500 Programmable ControllerMachine #3442
(Jackson, MI Cooper Building) -
30 Ton L & J OBI Used Press • 30 Ton Flywheel Gap Frame Press
30 Request a Quote30
Ton22″
Bed R-L2.5″
StrokeWas $15,000 • Now $4,500
L and J 3 3″ Stroke, 8″ Sh.Ht., 22″ x 12″ Bed, 150 SPM, with Motor and ControlsMachine #4407
(Jackson, MI Cooper Building) -
30 Ton Bruderer Used Press • 30 Ton High Speed Production Press
30 Request a Quote30
Ton21.5″
Bed R-L1.5″
StrokeWas $29,500 • Now $7,500
Bruderer BSTA 30 (3 Post) 1-1/2″ Stroke, 9″ SH, 21.5″ x 18.5″ Bed, 0-600 SPM, 25 HP, w/FeedMachine #4300
(Columbia, TN Warehouse) -
30 Ton Bruderer Used Press • 30 Ton High Speed Production Press
30 Request a Quote30
Ton21.5″
Bed R-L1.5″
StrokeWas $29,500 • Now $7,500
Bruderer BSTA 30, 3-Post Type 1/2″-1-1/2″ Adj Stroke, 8.5″ SH, 21″x12″
Bed, 5″ PA Servo Feed, 3 in stockMachine #4301
(Jackson, MI Falahee Building) -
30 Ton Bruderer 3-Post Used Press • 30 Ton High Speed Production Press
30 Request a Quote30
Ton21.5″
Bed R-L1.5″
StrokeWas $19,500 • Now $6,000
Bruderer BSTA 30, 3-Post Type .5″ – 1.5″ Stroke, 8.5″ Shut Height, 21.5″x12″ Bed, 100-600 SPM, w/5″W FeedMachine #4299
(Jackson, MI Falahee Building) -
30 Ton Brown & Boggs Used Press • 30 Ton OBI Flywheel Type Press
30 Request a Quote30
Ton29″
Bed R-L2″
StrokeWas $15,000 • Now $9,500
Brown and Boggs 15L 2″ Stroke, 7″ SH, 29″ x 19″ Bed, 150 SPM, with Motor and ControlsMachine #4414
(Jackson, MI Cooper Building) -
6″ x 6″ x 1/2″ Mubea Ironworker • Mubea KBL 104-7 • 2-1/2 Ironworker Machine
104 Request a Quote104
Tonnage19.5″
Depth of Throat0.875″
Avg. StrokeWas $19,000 • Now $9,500
Mubea KBL 104-7 2-1/2 6″ X 6″ X 1/2″ Capacity, 105 Ton Capacity, Complete with 8′ x 3′ Roller Ball Feed Table, with Set of PunchesMachine #4823
(Jackson, MI Falahee Building) -
28 Ton Crestwood Machine Co Gap Frame Used Press • 28 Ton Hydraulic Press
28 Request a Quote28
Ton26″
Bed R-L3″
StrokeWas $9,500 • Now $2,500
Crestwood C Frame Shop 3″ Str, 11″ DL, 26″ x 15″ Bed, with Motor and ControlsMachine #3978
(Jackson, MI Falahee Building) -
27 Ton L&J Used Press • 27 Ton Flywheel Gap Frame Press
27 Request a Quote27
Ton32″
Bed R-L0.75″
StrokeWas $12,500 • Now $8,950
L and J W-27 .75″ STR, 12″ SH, 32X16.5 BED, 100-200 SPM, 3″ ADJMachine #5323
(Columbia, TN Warehouse) -
1999 International Stake Truck, Diesel Type, with 2 Dual Axles • International 4700 DT466E
220,650 Request a Quote220,650
Miles6
Cylinders$7,500
PriceWas $12,500 • Now $7,500
220,650 Miles, 6 Cyl. Diesel, 350 HP, 6-Speed Manual Trans., 20' Bed-Wood, 2-Dual Axles, 48,000#GVW, 32,000 Lb. Net Load CapacityMachine #5384
(Jackson, MI Warehouse) -
Oak Serpentine • Oak SBM-30
85 Request a Quote84
Table Size12″
Throat Size72″
HeightWas $24,500 • Now $9,500
Oak SBM-30 84″ Dia. Table, 12″ Throat, 2 In Stock, Open to OffersMachine #3563
(Jackson, MI Falahee Building) -
Belco Electric – Belt Type Oven • Belco ST 3010
25 Request a Quote25
Belt Size200°
Temp Min500°
Temp MaxWas $5,000 • Now $1,250
200 to 500 Degrees F Temperature Range, 25″ Wide x 5′ Long Belt, 30 x 14 OpeningMachine #3968
(Jackson, MI Warehouse) -
6″ x .125″ CWP – ServoMatic IV • CoilMate SM06
6 Request a Quote110
Voltage6″
Material Width0.125″
Material ThicknessWas $4,500 • Now $1,500
CoilMate SM06 Feed Length 999.999″, 6″ Feeder Width, .125″ Material Thickness, 110V Power SupplyMachine #5501
(Jackson, MI Falahee Building) -
20,000 LB Bundle Flipper / Coil Upender • Custom
22 Request a Quote20000
Coil Capacity30″
Coil Width96″
Coil O.D.Was $32,500 • Now $12,500
Custom 71″ OD X 30″ Wide OR 96″ OD X 27″ Wide, 5 HP Rotation MotorMachine #4391
(Jackson, MI Falahee Building) -
Topaz Portable Air Conditioner • Topaz TZ-36
41,000 Request a Quote41,000
BTU67
Noise Level230V
VoltageWas $15,000 • Now $2,500
Durable office and industrial portable air conditioner for sale. Digital programmable thermostat provides ideal comfort controls.Machine #5286
(Jackson, MI Warehouse) -
13,000 LB. X 18″ X .125″ Perfecto “Combo” • Perfecto 24-HD-SB / 38-18-7
13000
Coil Capacity18″
Coil Width0.125″
Material Thickness14 Request a QuoteWas $65,500 • Now $24,500
Perfecto 24-HD-SB / 38-18-7 7 Roll Straightener (3 over 4) with 18″ Wide X .125″ Capacity (11 Gauge), 24″ Wide Coil Reel and Coil Car, 3 in StockMachine #3793
(Jackson, MI Falahee Building)
13,000 LB. X 18 X .125″ Perfecto Combo • Perfecto 24-HD-SB / 38-18-7
13000
Coil Capacity18″
Coil Width0.125″
Material Thickness14 Request a QuoteWas $65,500 • Now $24,500
Perfecto 24-HD-SB / 38-18-7 7 Roll Straightener with 18″ Wide .125″ Thickness Capacity (11 Gauge), with Coil Car, 3 in StockMachine #3791
(Jackson, MI Falahee Building)
11,000 LB. x 24″ x .180″ Orii Servo Feed Line • Orii LCC06HP2ALMAJAX-YHD
11000
Coil Capacity24″
Coil Width0.18″
Material Thickness12 Request a QuoteWas $65,500 • Now $29,500
Orii LCC06HP2ALMAJAX-YHD 24.4″ x .020″-.180″ Capacity Servo Feeder/Strn’r, 630 IPM, 11,000 LB x 24.4″ Reel, 59″ OD, 17.3″ – 24″ ID w/Hyd. Expansion, Coil Car, As Is $35,000Machine #4964
(Jackson, MI Falahee Building)
11,000 LB x 23.6″ x .090″ Aida Servo Line • Aida LFS-60E (2)
11000
Coil Capacity23.6″
Coil Width0.09″
Material Thickness12 Request a QuoteWas $55,500 • Now $18,500
Aida LFS-60E (2) 11,000 LB. x 23.6″ x .090″ Servo Feed Line, 984 IPM, Left to Right, 59″ OD, 20-24″ I.D., Coil Car, Overarm, Peeler, Guide Table, Loop Control, $30k As IsMachine #4965
(Jackson, MI Falahee Building)
10,000 Lb. x 30″ x .150″ Servo Line • American 1000 / / PM-FDC
11 Request a Quote10000
Coil Capacity30″
Coil Width0.15″
Material ThicknessWas $45,000 • Now $5,000
American 1000 / / PM-FDC 7 Roll Straightener with 30″ Wide Capacity Variable Speed & 10,000 Lb. x 36″ American Reel w/Coil Car, 30″ Wide Rowe Servo Feed w/ 3-1/2″ Dia. RollsMachine #4445
(Jackson, MI Falahee Building)
14″ x 48″ Reciprocating Surface Grinder • Gallmeyer and Livingston 6712 Industrial Grinder
48 Request a Quote14×48
Capacity16″
Cross Travel54″
LongitudinalWas $15,000 • Now $6,500
Gallmeyer and Livingston 6712 Approx. Cross Travel 16″, Approx. Longitudinal Travel 54″, Wheel Size 3″ x 14″, Wired for 240/440VMachine #5366
(Jackson, MI Falahee Building)
10 Ton Prince 4-Post Used Press • 10 Ton Hydraulic Press
10 Request a Quote10
Ton40″
Bed R-L12″
StrokeWas $17,500 • Now $12,500
Prince 12″ Stroke, 30″ Daylight, High Speed HydraulicMachine #4758
(Jackson, MI Cooper Building)
10 Ton Cleveland Tramrail • Cleveland 101ST – Undersling Hoist
10 Request a Quote10
Lift Capacity17′
Lift Height10′
Lift SpeedWas $5,000 • Now $3,000
Cleveland 101ST – Undersling Hoist 10T, 17' Lift, Trolley Style Crane HoistMachine #2886
(Jackson, MI Warehouse)
Large High Speed 6-Axis Robot | Welding / Handling • Motoman UP130
6 Request a Quote6
Axes132″
V-Reach104″
H-ReadhWas $25,000 • Now $4,500
Motoman UP130 Used Robotic Arm with XRC Controller, .0079″ Repeatability, 132″ Vertical Reach, 104″ Horizontal Reach, Small Footprint RobotMachine #5236
(Jackson, MI Falahee Building)
6,000 LB. X 20″ Littell Non Motorized Reel & Straightener • Littell 60-30
7 Request a Quote6000
Coil Capacity20″
Coil Width0.125″
Material ThicknessWas $16,500 • Now $7,500
Littell 60-30 30″ Wide, 16-20″ I.D., 60″ O.D., Electric Brake, with 20″ Wide StraightenerMachine #3304
(Jackson, MI Falahee Building)
6,000 LB. X 12″ SMS Single End | Motorized Reel • SMS
7 Request a Quote6000
Coil Capacity12″
Coil Width54″
Coil O.D.Was $7,500 • Now $5,000
SMS 12″ W, 18″-24 “ID, 54” ODMachine #4435
(Jackson, MI Falahee Building)
6,000 Lb x 24″ Custom | Motorized • Custom w/ Photo Eye
7 Request a Quote6000
Coil Capacity24″
Coil Width60″
Coil O.D.Was $5,500 • Now $3,500
Custom w/ Photo Eye 24″ Wide Mandrel, 60″ Coil OD, 20-24″ Coil ID, Motorized ReelMachine #4832
(Jackson, MI Falahee Building)
6 Ton Miller Bench Top Air Hydraulic Used Press • 6 Ton Hydraulic Press
6 Request a Quote6
Ton16″
Bed R-L8″
StrokeWas $3,500 • Now $1,500
Miller Fluid Power Corp. Air Bench Press High Tonnage at low PSI, 8″ Dia Cylinder Bore, 16″ x 12″ Bed Area, Daylight Approx. 0-8″Machine #5542
(Jackson, MI Falahee Building)
Belt Type Electric Oven – 160 Deg. • New England Oven and Furnace CONV
30 Request a Quote30
Belt Size100°
Temp Min160°
Temp MaxWas $19,500 • Now $2,500
Heat Rating 23 KW, Max. Temperature 160 Degrees, Min. Temperature 100 DegreesMachine #5372
(Jackson, MI Warehouse)
5 Ton Underslung Hoist • Used Acco-Wright Hoist
5 Request a Quote5
Lift Cap. *TonPendant
Control Type30′
Height of LiftWas $8,500 • Now $5,500
Acco-Wright 5 Ton x 33' Wide, 30' Lift, Single Girder, Underslung Type, Pendant, 2 in StockMachine #4899
(Jackson, MI Warehouse)
5 Ton Acco-Wright Underslung Hoist • Acco-Wright Used Hoist
5 Request a Quote5
Lift Cap. *Ton38′
Bridge Width30′
Height of LiftWas $8,500 • Now $5,500
Acco-Wright 5 Ton x 36' Wide, 30' Lift, Cable Type, Single Girder, Pendant, 2 in StockMachine #4869
(Jackson, MI Warehouse)
4,400 Lb. x 15.7″ W x .080″ Aida Servo Feed Line • Aida LFM-400R
5 Request a Quote4400
Coil Capacity15.7″
Coil Width0.08″
Material ThicknessWas $34,500 • Now $22,500
Aida LFM-400R 4,400 Lb. Double End Reel, x 15.7″ x .080″ Servo Feed and Strn’n, 15.7″ @ 45 SPM, 3.93″ @ 100 SPM, with Peeler & Overarm, Common BaseMachine #4966
(Jackson, MI Falahee Building)
31″ Wide Advance Floor Sweeper • Advance Machine Company 467215
431 Request a Quote431
Weight24V
Voltage31″
Sweeper WidthWas $4,000 • Now $950
Used Industrial Floor Sweeper for Sale with over 30″ of Floor Sweeping Capabilities.Machine #5093
(Ann Arbor, MI Headquarters)
Gem Gravure Company AM-STD Marker with Stand • Gem Gravure AM-STD
3 Request a Quote3″ Dia.
AM-STD Marker3 Type
DesignGEM
Marking WheelsWas $5,000 • Now $2,200
Gem Gravure AM-STDMachine #5421
(**On Location**)
2,500 Lbs. x 12″ Egan Motorized • Egan M250-12
3 Request a Quote2500
Coil Capacity18″
Coil Width20″
Coil O.D.Was $6,500 • Now $2,500
Egan M250-12 Coil Width 18″ (Rated for 12″), Max. OD 60″, Coil ID 14-20″Machine #5361
(Jackson, MI Falahee Building)
Servo Roll Feed • Custom
8 Request a Quote0
Roll Opening8″
Stock Width0″
Material ThicknessWas $4,500 • Now $1,500
Custom Servo Feeder 8″ Wide, Less ControlsMachine #5493
(Jackson, MI Falahee Building)
75 HP Hydromatic Hydroforming Power Unit • Hydromatic
75 Request a QuoteOPEN TO OFFERS
Machine #5065
(Jackson, MI Warehouse)
12.2″ x .250″ Dimeco (France) Servo • Dimeco 1125/B
12 Request a Quote0.0078
Min. Thickness12.2″
Coil Width0.25″
Material ThicknessWas $4,500 • Now $2,500
Dimeco 1125/B .0078″ to .250″ Material Thickness (14 Gauge to 3 Gauge), 12.2″ Wide, Max Section 77.5″Machine #5500
(Jackson, MI Falahee Building)
1.4 Ton 4-Post Down-Acting Used Press • 1.4 Ton Air Presses
1 Request a Quote1.4
Ton33″
Bed R-L24″
StrokeWas $5,950 • Now $3,950
Custom Heated Platen 24″ Str., 18″ DL, 33-1/2″ x 20-1/2″ Overall Bed, 29″ x 15-1/2″ Between Posts, with Safety Latches on RamMachine #3533
(Jackson, MI Falahee Building)
Rowe Servo Feeder • Rowe FAC-053-440
40 Request a Quote300
Speed40″
Stock Width0.06″
Material ThicknessWas $5,500 • Now $1,500
Rowe FAC-053-440 .020″ to .060″ Stock Thickness (26 Gauge to 16 Gauge), 40″ Wide Stock, 0-300 Feet per MinuteMachine #5428
(Jackson, MI Falahee Building)
Rowe Servo Feeder • Rowe FAC-053-440
40 Request a Quote300
Speed40″
Stock Width0.06″
Material ThicknessWas $5,500 • Now $1,500
Rowe FAC-053-440 .020″ to .060″ Metal Thickness (26 Gauge to 16 Gauge), 40″ Wide Capacity, 0-300 Feet per MinuteMachine #5429
(Jackson, MI Falahee Building)
Rowe Servo Feeder • Rowe FAC-053-440
40 Request a Quote300
Speed40″
Stock Width0.06″
Material ThicknessWas $5,500 • Now $1,500
Rowe FAC-053-440 .020″ to .060″ Material Thickness (26 Gauge to 16 Gauge), 40″ Wide Material, 0-300 Feet per MinuteMachine #5430
(Jackson, MI Falahee Building)
Littell Feeder • Littell
24 Request a Quote12
Feed Stroke24″
Feed Width0.125″
Material ThicknessWas $4,500 • Now $1,500
Littell MAKE US AN OFFERMachine #5181
(Jackson, MI Falahee Building)
Custom Built 22″ Wide Roll Coater • Custom Material Coater
0 Request a Quote0
Type0″
Width0″
SpeedWas $1,750 • Now $500
Custom OPEN TO OFFERSMachine #4141
(Jackson, MI Falahee Building)
Amerden AGVS Automated Vehicle • Amerden
34 Request a Quote
Excellent
Condition7″
Travel Up/Down34″
Floor to BedWas $12,500 • Now $1,750
39″ RL x 41″ FR Platform , 7″ Travel (Up/Down) ExcellentMachine #5300
(Jackson, MI Warehouse)
9.5″ x .060″-.090″ Indramat Servo Feed • Indramat
10 Request a Quote2
Roll Size12″
Coil Width0.078″
Material ThicknessWas $6,500 • Now $2,500
Indramat Approx. .060″ – .090″ Material Thickness (16 Gauge to 13 Gauge), Precision Servo Feeder, Indramat Servo DriveMachine #5392
(Ann Arbor, MI Headquarters)8″ W x .125″ TH Feed Lease Air Feeder • Feed Lease
8 Request a Quote7
Length of Stroke8″
Material Width0.125″
Material ThicknessWas $2,500 • Now $950
Feed Lease 8″ Wide, Approx .125″ Max Thickness, 7″ Max StrokeMachine #3477
(Jackson, MI Falahee Building)
8,000 Lb. x 28″ AMT w/Coil Car • AMT RM 650/7-40 HR 4.0/1400
0 Request a Quote8000
Coil ID28″
Coil Width70″
Coil O.D.Was $49,500 • Now $14,500
AMT RM 650/7-40 HR 4.0/1400 Uncoiler & Straightener Combo with Käfer Precision Adjustment Gauges & Keyence Fiber Optic Sensors.Machine #5090
(Jackson, MI Falahee Building)24″ X .060 Dallas Air Feeder • Dallas D200-2P
24 Request a Quote18
Stroke24″
Material Width0.06″
Material ThicknessWas $3,450 • Now $1,500
Dallas D200-2P 24″Wide, 18″ Stroke ,2″ Dia Bore, PR.MNT., Press Mount Type DesignMachine #2386
(Ann Arbor, MI)
18″ X .250″ COE Air Feeder • COE CF400
18 Request a Quote18
Stroke18″
Coil Width0.25″
Material ThicknessWas $6,500 • Now $4,500
COE CF400 .187″ to .250″ Material Thickness (7 Gauge to 3 Gauge), 40 Strokes per Minute SpeedMachine #5394
(Jackson, MI Falahee Building)
1/2 Ton 4-Post Used Press • 0.5 Ton Air Presses
1 Request a Quote0.5
Ton24″
Bed R-L12″
StrokeWas $4,950 • Now $1,950
Custom Shop 12″ Stroke, 12″ DL, 24″X24 Bed, 11″X7″ BPMachine #3534
(Jackson, MI Falahee Building)
Alma Machinery 70 Year Sale • While Machinery Lasts
0