Description
Gap Frame Press • Used 121 Ton Press for Sale
- Machine #
- 8131
- Condition
- Very Good
- Location
- Jackson, MI Cooper Building
- Year
- 1987
- Model
- Aida NC1-110(2)
Buy Now: $
| CAPACITY | 121 US TONS |
|---|---|
| STROKE | 7.08" |
| max die height | 13.77" OVER BOLSTER PLATE |
| SLIDE ADJUSTMENT | 3.5" MOTORIZED |
| BED AREA | 42.12" X 26.77" (RL X FB) |
| BOLSTER PLATE | 42.12" X 26.77" (RL X FB) |
| SLIDE AREA | 24.8" X 20.47" (RL X FB) |
| SPEED | 35 - 65 SPM |
| FLOOR TO BED HEIGHT | 35.65" - 41.15" WITH ISOLATOR PADS |
| DISTANCE BETWEEN UPRIGHTS | 25" |
| THROAT | 13.75" |
| CLUTCH | AIDA AIR CLUTCH AND BRAKE COMBINATION |
| PRESS CONTROLS | AIDA CONTROLS TESTED IN INCH, JOG & CONTINUOUS |
| ELECTRIC MOTOR | 10 HP 460V-3-60 YASKAWA VS MOTOR (UPDATED) | 11.6 AMPS - 14 FULL LOAD AMPS |
| APPROX. DIMENSIONS | 59" X 81" (RL X FB) X 120" - 125.5" WHEN ON 5.5 ISOLATOR PADS |
| APPROX. WEIGHT | APPROX. 21,340 LBS. |
| Equipped With | FLOOR STANDING, SINGLE BACK GEARED, HIGHLY RIGID FRAME W/LOW ANGULAR DEFLECTION, FAST ACTING HYDRAULIC OVERLOAD SYSTEM, 6-POINT FULL LENGTH BRONZE GIBS, QUILL MOUNTED FLYWHEEL W/FLYWHEEL BRAKE |
| Note | 71 PSI REQUIRED |
| Location | This Used Press is Located in Our Jackson, MI Cooper Building |
