Description
Heated Platen Press • Used 150 Ton Press for Sale
Model: Wabash V150H-24-X Press
Condition: Very Good
Location: Jackson, MI Cooper Building
Year: 1994
Machine #: 8066
Buy Now: $
| CAPACITY | 150 tons @ 3820 PSI | MAX. STROKE | 12" Up Acting stroke | MAX. DAYLIGHT | 33" (Adjustable to 16.5") | OVERALL BED & RAM AREA | 38" x 25" (RL x FB) | DISTANCE BETWEEN POSTS | 29" x 15" (RL x FB) | USABLE BED AREA | 29" x 25" (RL x FB) | HEATED PLATEN SIZE | 24" x 24" Square 2.75" Thick 11,500 Watts Each / (10) CARTRIDGE HEATERS (APPROX. 550 DEG F) | CYLINDER SIZE | 10" Dia. Bore | Ram Rod Dia | 7" Dia | 4 Post Size | 3.5" dia | Floor to Bed | 40" Minimum | PRESS CONTROLS | Square D Micro1 PLC with Expansion Card | HYDRAULICS | REXROTH AA10VS045 HYDRAULIC PUMP, 20 GALLONS PER MINUTE | ELECTRIC Motor | Lincoln 7.5 HP 1745 RPM 230/460V 20.4/10.2A 60HZ | Full Electric Load | 46 Amps (motor + Platens) - Platens can only run on 460V | APPROX. DIMENSIONS | 70" x 42" (RL x FB) X 82" High | Approx Weight | 7,900 lbs | Equipped With | 5 GPM WATER COOLED OIL COOLER HEAT EXCHANGER, 18MM PROXIMITY SWITCH POSITION CONTROL, WEST M2800 TEMPERATURE CONTROLLER | Note | __ |
|---|---|
| Location | This Used Press is Located in Our Jackson, MI Cooper Building |
